User manual LENOXX PH318

[. . . ] If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation. Avoid using a telephone (other than a cordless type) during an electrical storm. Do not use the telephone to report a gas leak in the vicinity of the leak. [. . . ] We suggest you carefully read this instruction manual before operating this set. YOUR SALES RECEIPT You will need your sales receipt should you ever need warranty service. You should also save the packing material if you want to move or ship this phone. 3 PH-318120499 MS V. 3 E CAUTION: This product is an electrical device and can be hazardous if immersed in water. To avoid the possibility of electrical shock, do not use it while in the bathtub or shower or when you are wet. If you accidentally drop it into water, first unplug its cord from the modular jack, then remove the equipment from the water. Avoid using this telephone during electrical storms in your immediate area, even though your telephone company may be using protective measures to limit electrical surges from entering your home, absolute protection from lightning is impossible. INSTALLATION INSTRUCTIONS Unpack your set, you should find: MAIN SET HANDSET COILED HANDSET CORD STRAIGHT TELEPHONE CORD WALL MOUNT ADAPTOR 4 PH-318120499 MS V. 3 E LOCATION OF CONTROLS COMFORTABLE ROUNDED HANDSET RINGER ON/OFF SWITCH TURNS OFF RINGER FOR UNDISTURBED PRIVACY 3 ONE-TOUCH MEMORY BUTTONS ALLOWS YOU TO SPEED DIAL EMERGENCY OR OTHER FREQUENCY DIALED NUMBERS PHONE JACK TO WALL OUTLET TONE/PULSE SWITCH EXTRA LARGE KEYPAD BUTTONS FOR EASIER VIEWING & DIALING AUTO MEMORY BUTTON DIALS 10 STORED NUMBERS MEMORY STORE BUTTON STORES YOUR NUMBERS INTO MEMORY SPEAKERPHONE VOLUME CONTROL ADJUSTS VOLUME OF SPEAKER FLASH BUTTON FOR CALL WAITING OR NEW DIAL TONE REDIAL BUTTON QUICKLY REDIALS THE LAST NUMBER YOU DIALED SPEAKERPHONE MICROPHONE PH-318120499 MS V. 3 E RECEIVER VOLUME CONTROL MEMORY INDEX SHOWS STORED NUMBERS 5 ELECTRONIC HOLD BUTTON WITH INDICATOR ALLOWS YOU TO PUT LINE ON HOLD SPEAKERPHONE BUTTON WITH INDICATOR INSTALLATION INSTRUCTIONS INSTALLATION TELEPHONE BASE HANDSET STRAIGHT TELEPHONE CORD To Telephone Jack COILED HANDSET CORD 1. Insert the modular plugs of the Coiled Handset Cord into the jack of the Telephone Handset and into the jack on the SIDE of the Telephone Base. Insert the modular plugs of the Straight (not coiled) cord into the modular jack at the REAR of the Telephone Base and into the Telephone Wall Jack (either end can be plugged in). This set is designed to connect directly to a modular jack MODULAR JACK If you have a 4-prong style jack, simply use a modular adaptor (not included). TELEPHONE LINE (4-prong style jack) RINGER ON/OFF SWITCH This switch is located on the rear of the set. NOTE: If your Ringer Switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring. TONE/PULSE SWITCH Select the type of dialing that you desire or that your telephone system requires. (If your phone doesnt dial out, switch to PULSE. ) PULSE - The phone will dial using rotary pulse dialing . NOTE: Even when your phone is set to pulse service, this phone can be switched to temporary tone dialing for access to services that require tone signaling like computer systems. Just press the button after dialing in pulse and your buttons can now be used for tone signaling for this call only. NOTE: When installation is completed, pick up the Handset to listen for dial tone before using speakphone for the first time. 6 PH-318120499 MS V. 3 E TELEPHONE OPERATION RECEIVING CALLS AS A NORMAL TELEPHONE When your telephone rings 1. Hang up the Handset to release the telephone line when conversation is completed. Select the desired dialing mode with the Tone/Pulse Switch (do this only the first time after installation). ANSWERING CALLS WITH SPEAKERPHONE (HANDS-FREE ANSWERING) When the phone rings, press the Speakerphone Button, it is not necessary to lift the Handset. Press the Speakerphone Button (the lamp will light). For 10 two-touch dialing: Press a number from 1 to 0 (where you would like your number stored). 6. In case you want to change a number you stored, simply store a new number, the old one will be automatically erased. If you move your phone to another room or disconnect the phone line, your stored numbers will remain in the memory for a short time, so quickly reconnect it to the new jack or you will have to re-program the memory numbers. When storing emergency numbers (like 911) if the operator comes on, tell her you are programming or testing a phone and you do not have an emergency. TO DIAL NUMBER FROM 3 ONE-TOUCH NUMBERS Get dial tone (by picking up Handset or pressing Speakerphone Button), and press one of the 3 emergency buttons marked with the symbols M1, M2 or M3. [. . . ] During the initial 1 year period after original purchase, we will service or exchange, at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial 1 year period expires, we will repair the unit covering any part(s) that need to be replaced at no charge, but will charge for the cost of labor, return postage paid by LENOXX. This warranty does not apply to any products which have been subject to misuse, neglect or accident. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. [. . . ]