User manual LENOXX CDR1902DUAL

[. . . ] Unplug this apparatus during lightening storms or when unused for long periods of time. 10. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped. This appliance shall not be exposed to dripping or splashing water and that no object filled with liquid such as vases shall be placed on the apparatus. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. [. . . ] During the programmed play, press the PROGRAM/REPEAT button twice, both the REPEAT and the PLAY/PROGRAM lamps will flash. Display shows PLAY/ PROGRAM REPEAT all the tracks (all songs) PLAY/ PROGRAM REPEAT all the tracks programmed PLAY/ PROGRAM REPEAT To cancel Repeat Play Press the REPEAT button until the REPEAT lamp goes off. 6 IB-CDR1902(AD)-WM-E-062802 5. Programmed Play You can make a program of up to 16 tracks in the order you want them to be played. PLAY/PROGRAM lamp To change the current program To cancel Programmed Play RANDOM BUTTON PROGRAM/REPEAT button 1. Slide the FUNCTION switch to CD position and the MODE switch to ON position. Press or to select the tracks you want to program in the order you want. Press will remain flashing in the display. PLAY/ PROGRAM REPEAT PLAY/ PROGRAM REPEAT Just create a new program following the programming procedure. The programmed memory will be lost only when the FUNCTION switch is slided to OFF or the CD door is opened. 2. Random Play Press the CD RANDOM button , the CD display will show some flashing symbols like . . . (currently played track number) continuously during the random play. Press to skip to the next random song. To play the songs in random order To resume normal play Press the CD RANDOM button again. 7 IB-CDR1902(AD)-WM-E-062802 6. Listening to the radio LEFT SIDE VIEW RIGHT SIDE VIEW 1 2 1+2 AUTO BUZZ ON MIN VOLUME MAX TUNING AM FM CD OFF RADIO ALARM VOLUME CONTROL TUNING BAND FUNCTION CONTROL SWITCH SWITCH Connect the supplied AC power cord (see Setting the Clock). 1 2 3 4 5 CD OFF RADIO Slide the FUNCTION switch to RADIO position and the MODE switch to ON. AUTO BUZZ ON AM FM Slide the BAND switch to the proper band position that you want. Adjust the VOLUME CONTROL for desired loudness. MIN MAX CD OFF RADIO Slide the FUNCTION switch to OFF position to turn off the radio. Remember to slide the MODE switch to BUZZ or AUTO position after listening, so that the buzzer alarm, CD music or radio will wake you up at your preset time. Make sure the volume control is adjusted loud enough to wake you up. 8 IB-CDR1902(AD)-WM-E-062802 7. More about radio operation PHONES jack FM ANTENNA BATTERY COMPARTMENT (at the bottom of the set) To improve broadcast reception Fully stretch out the FM ANTENNA for better FM reception. Or locate the set near a window. To listen without disturbing others Connect your headphones (optional - not included) into the PHONES jack at the back of the set. Remember to unplug the headphones if you want the set to wake you up in the morning. To use battery backup Install a 9V battery for Clock backup, so that if your home power is momentarily off, you will not have to set up the time & alarm settings. NOTE: The CLOCK display will not show the time but the time will be kept in memory and will reappear when power is restored. 9 IB-CDR1902(AD)-WM-E-062802 8. You may set ALARM 1 to wake you at a certain time, or ALARM 2 to wake you at a different time, or ALARM 1+2 - both alarms will sound at the time you set. This feature is useful for a husband & wife waking up at different time or a single person who likes to wake up at different time during weekdays and weekends. To set ALARM 1, slide the ALARM SET switch to position 1, the ALARM 1 lamp will turn on. To set ALARM 2, slide the ALARM SET switch to position 2, the ALARM 2 lamp will turn on. FRONT SIDE VIEW ALARM button ALARM 1 lamp ALARM 2 lamp REVERSE button FORWARD button LEFT SIDE VIEW BUZZ MAX BUZZ 1 FORWARD ALARM SET SWITCH MODE SWITCH button with 2 Press the ALARMuntil the togethershows the FORWARD button display the Slide the MODE switch to BUZZ or AUTO position. [. . . ] right position as you want. General There is no sound. Make sure the FUNCTION switch is at the Adjust the volume. when listening Alarm does not come on in the morning. AM or PM not set correctly. Is alarm time MODE switch is not set to the proper position. Are the ALARM lamps off?set in AM range (PM lamp off)? appears in the display even when a CD is in place. Insert the CD with the label side up. [. . . ]