User manual LENOVO THINKPAD T440S ULTRABOOK (20AQ0069FR)

[. . . ] User Guide ThinkPad T440s Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix E “Notices” on page 157 The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at: http://www. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. Notice on deleting data from your hard disk drive or solid-state drive . Replacing the hard disk drive or solid-state drive Replacing a memory module . [. . . ] The text file contains information on how to reinstall that device driver. €¢ If the subfolder for the device contains a file of setup information (a file with the extension . Inf), you can use the Add New Hardware program (in the Windows Control Panel) to reinstall the device driver. In the Add New Hardware program, when prompted for the device driver you want to install, click Have Disk and Browse. €¢ In the subfolder for the device, look for the executable file (a file with the extension . Attention: If you need updated device drivers for your computer, do not download them from the Windows Update Web site. For more information, see “Making sure device drivers are current” on page 118. Recovery overview 63 Solving recovery problems If you are unable to access the Rescue and Recovery workspace or the Windows environment, do one of the following: • Use a rescue medium to start the Rescue and Recovery workspace. See “Creating and using a rescue medium” on page 62. €¢ Use recovery media if all other methods of recovery have failed and you need to restore the hard disk drive to the factory default settings. see “Performing backup and recovery operations” on page 60. Note: If you are unable to access the Rescue and Recovery workspace or the Windows environment from a rescue medium or recovery media, you might not have the rescue device (an internal hard disk drive, a disc, a USB hard disk drive, or other external devices) set as the first boot device in the startup device sequence. You must first make sure that your rescue device is set as the first boot device in the startup device sequence in the Setup Utility program. See “Startup menu” on page 111 for detailed information about temporarily or permanently changing the startup device sequence. For more information about the Setup Utility program, see “Using the ThinkPad Setup program” on page 101. It is important to create a rescue medium and a set of recovery media as early as possible and store them in a safe place for future use. Recovery overview for the Windows 8 operating system This section provides information about the recovery solutions for the Windows 8 operating system. A Windows recovery image is preinstalled in the recovery partition on your computer. The Windows recovery image enables you to refresh your computer, or reset your computer to the factory default settings. You can create recovery media as backups or replacement for the Windows recovery image. With the recovery media, you can troubleshoot and fix the problems on your computer even if you cannot start the Windows 8 operating system. It is recommended that you create recovery media as early as possible. [. . . ] Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any other product, program, or service. Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. [. . . ]