User manual LENOVO THINKPAD EDGE E330 (NZSDVFR)

[. . . ] User Guide ThinkPad Edge E330 and E335 Notes: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety information” on page vi • Appendix D “Notices” on page 143 The Safety, Warranty, and Setup Guide and the Regulatory Notice have been uploaded to the Web site. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. Notice on deleting data from your hard disk drive or solid-state drive . Replacing the hard disk drive or solid-state drive Replacing a PCI Express Mini Card for wireless LAN connection . [. . . ] Creating and using a rescue medium With a rescue medium, such as a disc or a USB hard disk drive, you can recover the computer from failures that prevent you from gaining access to the OneKey Recovery Pro workspace on your hard disk drive. The recovery operations you can perform using a rescue medium vary depending on the operating system. Creating a rescue medium This section provides instructions on how to create a rescue medium. In the OneKey Recovery Pro main window, click the Launch advanced OneKey Recovery Pro arrow. In the Rescue Media area, select the type of the rescue medium you want to create. You can create a rescue medium using a disc, a USB hard disk drive, or a secondary internal hard disk drive. Click OK and follow the instructions on the screen to create a rescue medium. Using a rescue medium This section provides instructions on how to use the rescue medium you have created. € If you have created a rescue medium using a disc, use the following instructions to use the rescue medium: 1. Repeatedly press and release the F12 key when turning on the computer. In the Boot Menu window, select the desired optical drive as the first boot device. € If you have created a rescue medium using a USB hard disk drive, use the following instructions to use the rescue medium: 1. Attach the USB hard disk drive to one of the USB connectors on your computer. Repeatedly press and release the F12 key when turning on the computer. In the Boot Menu window, select the USB hard disk drive as the first boot device and press Enter. When the rescue medium starts, the OneKey Recovery Pro workspace opens. The help information for each feature is available from the OneKey Recovery Pro workspace. Reinstalling preinstalled programs and device drivers Your computer has provisions that enable you to reinstall selected factory-installed programs and device drivers. reinstalling preinstalled programs To reinstall selected program programs , do the following: 1. In it are several subfolders named for the various preinstalled programs. Double-click Setup, and then follow the on-screen steps to reinstall the program. Reinstalling preinstalled device drivers Attention: When you reinstall device drivers, you are changing the current configuration of your computer. [. . . ] The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to: Lenovo (United States), Inc. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. [. . . ]