User manual LENCO DVP-1023 CR

[. . . ] 6. Number Buttons (0, 1, . . . , 9) 7. SETUP Button Brings up the setup MENU to set up the system's language, audio, display, password etc. 8. (PLAY/ENTER)/DIRECTION Buttons 9. STOP ( ) Button 10. SKIP FORWARD ( )Button Use to skip to next title, chapter or track. 11. SKIP BACKWARD ( ) Button Use to skip to previous title, chapter or track. 12. ZOOM Button 13. GOTO Button Use to enter the specific chapter, track or time to playback. [. . . ] ~ 14 ~ Fast Forward and Reverse 1. During playback, to fast forward, press and hold (on the player) to increase the fast forward speed 2x, then repeatedly press to increase to 4x, 8x, 16x, 32x. You can also simply repeatedly press on the remote control to increase the fast forward speed. 2. During playback, to fast reverse, press and hold (on the player) to increase the fast reverse speed 2x , then repeatedly press to increase to 4x, 8x, 16x, 32x. You can also simply repeatedly press on the remote control to increase the fast reverse speed. 3. To resume normal playback, press . Playing a Disc Slow Motion 1. During playback, repeatedly press SLOW to play at 1/2, 1/4, 1/8, 1/16, 1/32 speeds. Repeat the above to play the other marked scenes. GOTO You can go directly to a desired chapter and play, or play at a desired point of time. Press GOTO, use to select title (TT) and chapter (CH) and enter the desired number. Press ENTER to confirm and start play. Repeat Playback You can play a chapter, a track, a title, a file or the entire disc repeatedly. 2. To cancel repeat playback, repeatedly press REPEAT until " off "ppears on the screen. Mark (Bookmark) The Mark function lets you "bookmark" points on the disc for playback at a later time. Follow these steps to set up marker playback: 1. During playback, press MARK on the remote control. You can perform marker playback at any time by pressing MARK, and using to select one of the bookmarks, then ~ 15 ~ ZOOM ZOOM lets you enlarge the video image during playback and pan through the enlarged image. 1. Press ZOOM repeatedly during video playback to enlarge the image to x 2 or x 4 times of the normal size. 2. Press ZOOM repeatedly while displaying JPEG file and Picture CD disc to zoom in the picture at 150% or 200% and zoom out the picture at 25% or 50%. Use direction keys ( and ) to move around (pan and scan) the enlarged video or picture. Playing a Disc Mute Press MUTE to silence the audio, press MUTE again to restore it. TITLE Press TITLE, it takes you to the very beginning of the title and play, or to the MENU if it has title menu. Menu/PBC During DVD playback, press MENU/PBC to return to the disc's Start Menu. If the disc does not have the Start Menu, or discs that refuse MENU function, appears. For VCD playback, press MENU/PBC to turn on/off PBC (Playback Control). If PBC is enabled, menu of scene's thumbnails appears, you can make selection for playback. DISPLAY Repeatedly press DISPLAY during playback to display various playback information such as current title, chapter, track elapsed time, languages etc. L/R This function is mostly used for karaoke (sing along) discs, by repeatedly pressing L/R, you can select STEREO, MONO (Left), MONO (Right), MIX MONO etc. LANGUAGE Repeatedly press LANGUAGE during DVD playback to change the language of the voice if the disc has multiple languages. This function is only valid for DVDs. Subtitle Repeatedly press SUBTITLE during DVD playback to change the subtitle's language If the disc has multiple subtitle's languages. This function is only valid for DVDs. P/N This is used when you connect the Player to a TV and watch video on the TV. Repeatedly press P/N to select NTSC, PAL and AUTO to match that of your TV. The LCD screen does not have NTSC or PAL, so if you watch video on the Player's screen, it is recommended to set to NTSC which will give a better video quality. [. . . ] Check that the signal transmission is directed at the remote control senor on the DVD player. Disc does not play Check that the disc is a DVD, DVD-RW, VIDEO CD, or AUDIO CD. Contact the service center for lens cleaning. No picture Check if the LCD on/off switch is stuck, and cannot move freely when the top cover is open. No sound Check the volume setting. Speakers cannot be used with the headphones. ~ 25 ~ Troubleshooting Symptom While in the input mode, no picture is output from the external component to the DVD player Battery pack won't charge Check Check that the video or audio cable is securely connected. Check that the DVD player is turned on. Wait until the battery pack is sufficiently cooled down. Charging LED indicator does not light Check with another fully charged pack if the LED lights. [. . . ]