User manual LEMON 020-T

[. . . ] Lemon 020-T Lemon 030-T Manual Digital Terrestrial Receiver Lemon 020-T Lemon 030-T Detailed Table of Contents 1. Trouble-shooting Technical data Index (A-Z) 2 3 4 6 7 15 27 28 30 Table of Contents 1. Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control elements and connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Now use the directional keys to select the line "Installation/Setup", and confirm by pressing the "OK/Menu" key. In the sub-menu "Installation/Setup" select the entry "Display Settings", and confirm by pressing the "OK/Menu" key. Main Menu Installation / Setup Sleep Timer Parental Lock Channel list Manager TV Guige Default Settings Exit 9-4-02 14 5. Graphical User Interface ( Menus) The various on-screen displays available are described in detail in this chapter. The actual on-screen displays generated by your receiver may differ slightly from those shown here, as continuous updates of the software may alter the appearance or even the structure of the displays. Menu Navigation within the on-screen displays is effected by means of the four directional keys, by means of the "OK/Menu" key, which is used to confirm a selection, as well as in some cases by means of the colored function keys. In each case you can exit from a page by pressing the "Exit" key. From here you can select the various sub-menus: Exit 5. 1 Installation/Setup This is the place to set the basic parameters of your receiver. 17:00 Main Menu Installation / Setup Sleep Timer Parental Lock Channel list Manager TV Guide Default Settings Exit 9-4-02 5. 1. 1 Display Settings Display Language: The on-screen display may be shown in a variety of languages. Use the directional keys to select the desired language, then confirm by pressing the "OK/Menu" key. Display Colour: If you would prefer to view the display in a different colour, use the directional keys to select the desired colour (Type 1, 2 or 3), and confirm by pressing the "OK/Menu" key. the degree to which the TV image is visible through the overlaid on-screen text display. Use the directional keys to select the degree of transparency, from 40% to 100%, then confirm by pressing the "OK/Menu" key. Message Time: When switching between programmes, for instance, a message is briefly displayed with programme information. The duration of this message being displayed can be set, from 1 to 9 seconds. Use the directional keys to select the desired message time, then confirm by pressing the "OK/Menu" key. 17:00 Installation / Setup Display Settings Audio / Video Settings Time / Date Channel Search System information Software update Exit 9-4-02 Display Settings Language English Deutsch Francais Color Type 1 Type 2 Type 3 Transparency 10% 40% 60% 80% Popup Time 1sec. 9sec. Exit Preferred Subtitle English Deutsch Francais Nederlands Subtitle On Off - Move - select Exit: Quit 15 5. 1. 2 Audio/Video Settings Scart connectors: Depending on the type of appliance connected, you can determine the type of signal to be fed to the Scart connectors marked "TV". Use the directional keys to select from: CVBS (Composite/FBAS) or RGB (only for TV Scart connector). Screen size (aspect ratio): Use the directional keys to select the appropriate picture format for your TV set (4:3 or 16:9), then confirm by pressing the "OK/Menu" key. Video/Audio out: The rear panel of the receiver has got a Cinch connector which can be used either to output a Video signal or a digital electrical audio output signal. Activate the wanted output (see connector 12 page 4). Audio / Video Settings TV Scart Screen size Video/Audio Test Picture out Video On Audio CVBS RGB 4:3 16: 9 Digital Audio Out RF Modulator Preferred Audio English Deutsch Francais Nederlands Stereo Dolby Digital Exit - Move 5. 5 MHz 6. 0 MHz 6. 5 MHz Channel 22 - select Exit: Quit Digital Audio out:The receiver is also equipped with two digital audio outputs (electrical and optical). When Dolby digital is chosen, the receiver will automatically detect if AC3 sound is available and will activate it on the digital audio output, if no AC3 is available the digital Audio outputs will have a classic stereo PCM signal. RF Modulator (optional): the receiver is also available equipped with a built-in RF modulator, which provides the facility to output the currently selected TV programme via a UHF channel. Select the audio frequency (5, 5 MHz for PAL B/C/G/H, 6, 0 MHz for PAL I as well as 6, 5 MHz for PAL D/K/L). Then use the numeric keys to enter the UHF channel on which the TV image is to be transmitted. [. . . ] From this widget, the user can toggle the time using the Left/Right navigation keys and define/cancel a reminder pressing the Timer keys on the remote control. When the reminder will start, the user will have the ability to zap to the programmed reminder event automatically from a popup message. A small clock logo is displayed at the right of the widget when there is a reminder. 126 Reallty TV scrambled 14:35 - 15:29 BAator tluzoltAok 15:30 - 15:54 furcsa jAargAanyok 15:04 5. 6. 2 Calling up the EPG You can access the electronic programme guide at any time by pressing the "EPG" key (yellow function key) on the remote control. Here, you must use the directional keys to select the entry "TV Guide / EPG", then confirm by pressing the "OK/Menu" key. 17:00 Main Menu Installation / Setup Sleep Timer Parental Lock Channel list Manager TV Guide Default Settings Exit 9-4-02 24 Channel Guide The receiver is able to display the programmes available on the channel currently selected, indicating the current programme as well as all following programmes. [. . . ]