User manual LEISURE H101PK 100

[. . . ] IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. [. . . ] The following item appears only when you set the CPU Power Phase Control to [Manual Adjustment]. Chapter 3 3-16 Manual Adjustment [Fast] Allows you to set a faster phase response for the CPU to increase system performance or to slower phase response to decrease DRAM power efficiency. Configuration options: [Ultra Fast] [Fast] [Medium] [Regular] Chapter 3: BIOS setup DRAM-AB Current Capability [100%] Set a higher value for a total power range of DRAM slots A and B, and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] DRAM-AB Voltage Frequency [Auto] Allows you to adjust the DRAM slots A and B switching frequencies. Assign a fixed high DRAM frequency to increase overclocking range or a low DRAM frequency for better system stability. The following item appears only when setting this item to [Manual]. DRAM-AB Fixed Frequency Mode [300] Assign a fixed high DRAM frequencies of DRAM slots A and B to increase the overclocking range or a low DRAM frequency for better system stability. The values range from 300kHz to 500kHz with a 50kHz interval. DRAM-AB Power Phase Control [Standard] [Standard] [Optimized] [Extreme] Allows you to set the Auto mode. Allows you to set the full phase mode. DRAM-CD Current Capability [100%] Set a higher value for a total power range of DRAM slots C and D, and extends the overclocking frequency range simultaneously. Configuration options: [100%] [110%] [120%] [130%] DRAM-CD Voltage Frequency [Auto] Allows you to adjust the DRAM slots C and D switching frequencies. Assign a fixed high DRAM frequency to increase overclocking range or a low DRAM frequency for better system stability. The following item appears only when setting this item to [Manual]. DRAM-CD Fixed Frequency Mode [300] Assign a fixed high DRAM frequencies of DRAM slots C and D to increase the overclocking range or a low DRAM frequency for better system stability. The values range from 300kHz to 500kHz with a 50kHz interval. DRAM-CD Power Phase Control [Standard] [Standard] [Optimized] [Extreme] Allows you to set the Auto mode. Allows you to set the full phase mode. ASUS X79-DELUXE 3-17 Chapter 3 CPU Performance Settings The subitems in this menu allow you to set the CPU ratio and their features. Enhanced Intel SpeedStep Technology [Enabled] Allows the operating system to dynamically adjust the processor voltage and cores frequency, resulting to a decreased average power consumption and decreased average heat production. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. DRAM CTRL REF Voltage on CHB [Auto] Fraction of DRAM Voltage for referencing control on DRAM on Channel B. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. DRAM DATA REF Voltage on CHB [Auto] Fraction of DRAM Voltage for referencing data on DRAM on Channel B. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. Chapter 3 3-20 DRAM CTRL REF Voltage on CHC [Auto] Fraction of DRAM Voltage for referencing control on DRAM on Channel C. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. Chapter 3: BIOS setup DRAM DATA REF Voltage on CHC [Auto] Fraction of DRAM Voltage for referencing data on DRAM on Channel C. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. DRAM CTRL REF Voltage on CHD [Auto] Fraction of DRAM Voltage for referencing control on DRAM on Channel D. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. DRAM DATA REF Voltage on CHD [Auto] Fraction of DRAM Voltage for referencing data on DRAM on Channel D. The values range from 0. 39500V to 0. 63000V with a 0. 00500V interval. DRAM READ REF Voltage on CHA [Auto] Fraction of DRAM Voltage for CPU IMC to reference reads on DRAM on Channel A. The values range from 0. 38500V to 0. 31500V with a 0. 00500V interval. DRAM READ REF Voltage on CHB [Auto] Fraction of DRAM Voltage for CPU IMC to reference reads on DRAM on Channel B. The values range from 0. 38500V to 0. 31500V with a 0. 00500V interval. DRAM READ REF Voltage on CHC [Auto] Fraction of DRAM Voltage for CPU IMC to reference reads on DRAM on Channel C. The values range from 0. 38500V to 0. 31500V with a 0. 00500V interval. DRAM READ REF Voltage on CHD [Auto] Fraction of DRAM Voltage for CPU IMC to reference reads on DRAM on Channel D. The values range from 0. 38500V to 0. 31500V with a 0. 00500V interval. CPU Spread Spectrum [Auto] [Auto] [Disabled] [Enabled] [Auto] Automatic configuration. Enhances the BCLK overclocking ability. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. [. . . ]