User manual LEICA Z16 APO

[. . . ] Leica Z6 APO Leica Z16 APO User Manual General Instructions Safety Concept Before using your macroscope for the first time, please read the "Safety Concept" brochure included with your instrument. Use in clean rooms The Leica Z series can be used in clean rooms without any problems. Cleaning Do not use any unsuitable cleaning agents, chemicals or techniques for cleaning. Never use chemicals to clean colored surfaces or accessories with rubberized parts. [. . . ] Furthermore, all Leica eyepieces can be equipped with practical graticules that enable measuring and quantifying of specimens. Dioptric Correction A built-in dioptric correction is available for eyeglass wearers. Hold the eyepiece firmly and rotate the eyecups forwards counterclockwise. Hold the eyepiece firmly and rotate the eyecups clockwise towards the rear, as otherwise the viewing distance is too great. 2. If an eyepiece is equipped with the integrated dioptric correction, turn the value to the "0" mark. 2. If an eyepiece is equipped with the integrated dioptric correction, turn the value to the "0" mark. By the way, one benefit of viewing with eyeglasses is a drastically lower risk of bacterial transmission (see page 55). The soft material of the eyecup also ensures that your glasses will not be scratched, even if they contact the eyepiece. Leica Z6 APO / Z16 APO User Manual 51 The Correct Interpupillary Distance The interpupillary distance is correctly set if you see a single circular image field when looking at a specimen. If you are still a novice macroscope user, you may need a short time to become accustomed to this. Reference value The distance between eye and eyepiece measures approx. Push the eyepieces together or separate them until you see a circular image. Slowly approach the eyepieces with your eyes until you can see the complete image field without corner cutting. Leica Z6 APO / Z16 APO User Manual 52 Dioptric Correction Leica macroscopes are parfocally matched. The following adjustments only have to be carried out once by each user. Therefore, all Leica eyepieces are also available with built-in dioptric correction, allowing the macroscope to be used without glasses even by those with vision problems. Set the dioptric correction of both eyepieces to the mid position ("0" diopter settings). Hold one eye closed and rotate the other eyepiece in the "-" direction until the specimen appears sharp. Then, open the other eye and correct the diopter settings until the image is uniformly sharp. Now, if you adjust the magnification from the lowest to the highest level, the specimen is always brought into sharp focus. The system is now parfocally matched to your eyes. Leica Z6 APO / Z16 APO User Manual 53 Reticules Use Leica reticules make length measurements and counting easier, particularly for workstations that are not equipped with a digital camera and LAS software. The Leica reticules for length measurements and numbering are fitted in mounts and are inserted into the eyepieces. You can now align the reticule by rotating the eyepiece in the tube and then tightening it using the clamping screw. 3. Screw the insert and reticule firmly into place and replace the eyepiece in the tube. Leica Z6 APO / Z16 APO User Manual 54 Health Notes Potential sources of infection Direct contact with eyepieces is a potential transmission method for bacterial and viral infections of the eye. [. . . ] closed) Magnification Resolution Visible structural width Numerical Aperture Object field 6. 3:1 0. 57× ­ 3. 6× 0. 57 / 0. 8 / 1 / 1. 25 / 1. 6 / 2 / 2. 5 / 3. 2 / 3. 6 ­ 7. 1× ­ 45× 60 ­ 351 Lp / mm 8. 3 ­ 1. 4 µm 0. 02 ­ 0. 117 nA 32. 3 mm ­ 5. 1 mm 3. 1 mm ­ 0. 09 mm 18. 1 mm ­ 0. 4 mm 57× ­ 360× 120 ­ 702 Lp / mm 4. 2 ­ 0. 7 µm 0. 04 ­ 0. 234 nA 4. 2 mm ­ 0. 67 mm Leica Z16 APO 16:1 0. 57× ­ 9. 2× 0. 57 / 0. 8 / 1 / 1. 25 / 1. 6 / 2 / 2. 5 / 3. 2 / 4 / 5 / 6. 3 / 8 / 9. 2 ­ 7. 1× ­ 115× 51 ­ 336 Lp / mm 9. 8 ­ 1. 49 µm 0. 017 ­ 0. 112 nA 32. 3 mm ­ 2. 0 mm 3. 8 mm ­ 0. 05 mm 18. 4 mm ­ 0. 4 mm 57× ­ 920× 102 ­ 672 Lp / mm 4. 9 ­ 0. 74 µm 0. 034 ­ 0. 224 nA 4. 2 mm ­ 0. 26 mm Visual data with 1× planapochromatic objective / 10× eyepieces / 1. 25× Y tube Visual data with 2× planapochromatic objective / 40× eyepieces / 1. 25× Y tube Data with Leica DFC490 digital camera / 1× planapochromatic objective / AS tube / 0. 63× video objective Magnification Chip: Object Digital resolution* Object field projected onto chip Depth of field (diaphragm open) Depth of field (dia. closed) 0. 36× ­ 2. 3× 33. 3 ­ 210 Lp / mm 24. 5 mm × 18. 4 mm / 3. 9 mm × 2. 9 mm 1. 06 mm ­ 0. 03 mm 10. 7 mm ­ 0. 26 mm 0. 36× ­ 5. 8× 33. 3 ­ 336 Lp / mm 24. 5 mm × 18. 4 mm / 1. 5 mm × 1. 14 mm 1. 4 mm ­ 0. 03 mm 10. 9 mm ­ 0. 3 mm Leica Z6 APO / Z16 APO User Manual 108 Optical Accessories for Leica Z6 APO & Z16 APO Leica Z6 APO & Z6 APO Objectives Working distances · Planapochromat1×, 2×, 0. 8×, 0. 5×, 5× · Mseriesachromaticobjectives0. 63×, 0. 5×, 0. 32×, lead-free · · · · · 187mm(0. 5×planapochromat) 97mm(1×planapochromat) 112mm(0. 8×planapochromat) 39mm(2×planapochromat) 19mm(5. 0×planapochromat) 0. 5×, 0. 32×, lead-free Objective adapters · ForMseriesachromaticobjectives · For10×and20×HRobjectives · For10×and20×DMobjectives · DMobjectiveNPlanL20×/0. 40corr · DMobjectiveNPlan10×/0. 25­/A5. 8 10 mm travel, optional · Inclinedandstraightbinoculartubes · ApochromaticErgoTube®10º­50ºwithsynchronizedinterpupillarydistanceadjustment · VariousErgoModules®(optional) 55 mm ­ 75 mm DM objectives (suitable for the upper zoom range only) Fine Focusing Binocular tubes, ergonomics Interpupillary distance Ergonomic wide-field eyepieces 10× / 21, 16× / 14, 25× / 9. 5, 40× / 6, distortion-free, attachable eyecups for protection from infection for persons wearing glasses ErgoTube® and ErgoModule® are registered in the United States Patent and Trademark Office Leica Z6 APO / Z16 APO User Manual 109 Ambient Conditions and Weights Ambient operating conditions Ambient temperature Rel. humidity Air pressure -20 °C to +52 °C 10% ­ 95% (non-condensing) 500 ­ 1200 hPa +10ºCto+40ºC Up to 35 °C ambient temperature: 75% 700 ­ 1060 hPa Weight 10 447 174 Leica Z6 APO A zoom system 10 447173 Leica Z16 APO A zoom system 10 447 176 1× planapochromatic objective 10 447 178 2× planapochromatic objective 10 446 360 0. 8× planapochromatic objective 10 447 177 0. 5× planapochromatic objective 10 447 204 Video/phototube AS 10 447 128 Video/phototube A 10 447 109 Y tube 10 447 196 Carrier for AS tube 1. 030 kg 1. 330 kg 0. 150 kg 0. 270 kg 0. 170 kg 0. 170 kg 0. 120 kg 0. 200 kg 0. 430 kg 0. 340 kg Leica Z6 APO / Z16 APO User Manual 110 Leica TL ST Transmitted-light Base Light source Quick illuminant change Illuminated area Power supply unit Halogen lamp 12V/20W Yes 50 mm Input voltage 100 ­ 240 V~, frequency 50 ­ 60 Hz energy consumption 30 W max. , ambient temperature 10­40 °C Power plug, power switch 7. 4 kg Connections Weight Illumination types Bright field Dark field Oblique light Relief Contrast System (RCTM) CCIC (Constant Color Intensity Control) Internal shutter/lamp control Integrated filter holder Coated optics for increasing the color temperature Matching of high num. aperture Remote control options AntiShockTM Pads Dimensions (W×H×D) Yes Yes (single-sided) No No No No Yes Yes No No Yes 340×430×85 mm Leica Z6 APO / Z16 APO User Manual 111 Leica TL BFDF Transmitted-light Base Light source Illuminated area Connections Weight External via cold light source 40 mm Connection for cold light guide, active f=10mm, end tube f=13mm 5. 8 kg Illumination types Bright field Yes Dark field Yes Oblique light No Relief Contrast System (RCTM) No CCIC (Constant Color Intensity Control) No Internal shutter/lamp control Yes* Integrated filter holder No Coated optics for increasing the color No temperature Matching of high num. [. . . ]