User manual LEGRAND MICROREX D11

[. . . ] The general shutter controller Using its Up - Stop - Down keys it can simultaneously control a set of products (actors) that have been associated with it during the learn phase(1). [. . . ] The general shutter controller Using its Up - Stop - Down keys it can simultaneously control a set of products (actors) that have been associated with it during the learn phase(1). It has two auxiliary inputs, E1 and E2, which can be connected to a light sensitive switch, a wind/sun safety control, time switch, etc: - The appearance of voltage on E1 starts the scenario which is recorded on the Up control key. - The appearance of voltage on E2 starts the scenario which is recorded on the Down control key. Step 1: Start the learn phase (on the LEADER) Press the command key that is to control the scenario To add a number of products to the scenario, repeat and operations for each actor. Press the command key that is to be associated with the leader Press LEARN To remove the product from the scenario, go to step 3 Clear all the scenarios linked with the command key (on the LEADER) The scenario is cleared Press LEARN Press the command key and hold it down for 10 s 5s Clear all the scenarios linked to this product (on the LEADER) Return the product to factory configuration Press LEARN Press LEARN and hold down for 10 s 5s The indicator lamp goes off The indicator lamp blinks slowly 7 The indicator lamp blinks quickly The indicator lamp flashes [. . . ] Step 1: Start the learn phase (on the LEADER) Press the command key that is to control the scenario To add a number of products to the scenario, repeat and operations for each actor. [. . . ]