User manual LEGO CREATOR 4955

[. . . ] Reproduction in any manner whatsoever without the written permission of Dell Inc. Trademarks used in this text: Dell, the LEGO logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, DellNet, and PowerConnect are trademarks of Dell Inc. ; Intel and Pentium are registered trademarks of Intel Corporation; Microsoft, Windows, and Outlook are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. disclaims any proprietary interest in trademarks and trade names other than its own. Model DCSM March 2005 P/N T8144 Rev. [. . . ] 1 Click the Start button, point to All Programs Accessories System Tools, and then click System Restore. 2 Click Undo my last restoration and click Next. Enabling System Restore If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System Restore is automatically disabled. To see if System Restore is enabled: 1 Click the Start button and click Control Panel. 5 Ensure that Turn off System Restore is unchecked. Using DellTM PC Restore by Symantec NOTE: Dell PC Restore is not available in all countries. Use Dell PC Restore by Symantec only as the last method to restore your operating system. PC Restore restores your hard drive to the operating state it was in when you purchased the computer. Any programs or files added since you received your computer-- including data files--are permanently deleted from the hard drive. Data files include documents, spreadsheets, e-mail messages, digital photos, music files, and so on. NOTICE: Using PC Restore permanently deletes all data on the hard drive and removes any applications or drivers installed after you received your computer. To use PC Restore: 1 Turn on the computer and watch the keyboard status lights. 2 Immediately upon seeing the lights flash, press <Ctrl><F11>. NOTICE: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components. 54 Removing and Installing Parts Front View of the Computer 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 cover latch release location of Service Tag CD or DVD eject button CD or DVD activity light FlexBay drive Use this latch to remove the cover. Use the Service Tag to identify your computer when you access the Dell Support website or call technical support. The drive light is on when the computer reads data from the CD or DVD drive. For information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" on page 18. Use the microphone connector to attach a personal computer microphone for voice or musical input into a sound or telephony program. On computers with a sound card, the microphone connector is on the card. 6 microphone connector 7 headphone connector Use the headphone connector to attach headphones and most kinds of speakers. Removing and Installing Parts 55 www. dell. com | support. dell. com 8 diagnostic lights (4) Use the lights to help you troubleshoot a computer problem based on the diagnostic code. The hard drive activity light is on when the computer reads data from or writes data to the hard drive. The light might also be on when a device such as a CD player is operating. NOTICE: To avoid losing data, do not use the power button to turn off the computer. Use the front USB connectors for devices that you connect occasionally, such as joysticks or cameras, or for bootable USB devices (see "System Setup Options" on page 107 for more information on booting to a USB device). [. . . ] If all labels carry an FCC Class B rating as distinguished by either an FCC ID number or the FCC logo, ( ), your system is considered to be a Class B digital device. Once you have determined your system's FCC classification, read the appropriate FCC notice. Note that FCC regulations provide that changes or modifications not expressly approved by Dell could void your authority to operate this equipment. Operation is subject to the following two conditions: This device may not cause harmful interference. [. . . ]