User manual LEGO ARCTIC 6579

[. . . ] · Note that the fishing/hunting level indicator and moon phase indicator are all based on calculated values. · See the "Timekeeping" section of this manual for information about setting the current time and date, and about specifying your Home Site. About This Manual Module 3768 · The operational procedures for Modules 3768 and ARCTIC 6579 are identical. · Button operations are indicated using the letters shown in the illustration. · For the sake of simplicity, the sample displays in this manual do not show the analog hands of the watch. [. . . ] · With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for times in the range of noon to 11:59 p. m. and the A (AM) indicator appears to the left of the hour digits for times in the range of midnight to 11:59 a. m. · With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without any indicator. · The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is applied in all other modes. · The A and P indicators are not displayed with the Timekeeping Mode time on the Countdown Timer Mode and Dual Time Mode screens. 1. In the Fishing/Hunting Mode, hold down A until the year setting starts to flash, which indicates the setting screen. Press C to move the flashing in the sequence shown below to select the other settings. Year Month ­ Day Month Day 3. · You can specify a date in the range of January 1, 2000 to December 31, 2099. Use A to display either the fishing/hunting level screen or the Moon Data screen. Setting the Analog Time Perform the procedure below when the time indicated by the analog hands does not match the time of the digital display. Stopwatch Hours Minutes Seconds To adjust the analog time 1. In the Timekeeping Mode, press C six times to enter the Hand Setting Mode. Hold down A until the current digital time starts to flash, which indicates the analog setting screen. · When auto-repeat is turned on, the countdown will restart automatically without pausing when it reaches zero. · The countdown timer measurement operation continues even if you exit the Countdown Timer Mode. · Press D while a countdown operation is in progress to pause it. · To completely stop a countdown operation, first pause it (by pressing D), and then press A. This returns the countdown time to its starting value. 2 Operation Guide 3768/ARCTIC 6579 To set up the countdown timer 1. While the countdown start time is on the display in the Countdown Timer Mode, hold down A until the hour setting of the countdown start time starts to flash, which indicates the setting screen. · If the countdown start time is not displayed, use the procedure under "To use the countdown timer" to display it. · SNZ indicator flashes during the 5-minute intervals between alarms. · Displaying the Alarm1 setting screen while the snooze alarm is turned on automatically turns off the snooze alarm (making Alarm1 a one-time alarm). Dual Time The Dual Time Mode lets you keep track of time in a different time zone. You can select Standard Time or Daylight Saving Time for the Dual Time Mode time. · In the Dual Time Mode, the seconds count is synchronized with the seconds count of the current digital time. To set the Dual Time DST indicator Dual time (Hour : Minutes) Alarm Types The alarm type is determined by the settings you make, as described below. [. . . ] · To set an alarm that does not include a day (daily alarm, 1-month alarm), set xx for the day. Use D and B until the xx mark appears (between the end of the month and 1) while the day setting is flashing. · When setting the alarm time using the 12-hour format, take care to set the time correctly as a. m. Press A to exit the setting screen. Alarm Operation The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the watch is in. [. . . ]