User manual LA CROSSE TECHNOLOGY WS9162

[. . . ] If this does not happen after 1 minute, the batteries will need to be removed from both units and reset from step 1. In order to ensure sufficient 868 MHz transmission, the final position between the Temperature Station and the transmitter should not be more than 100 meters (see notes on "Positioning" and "868 MHz Reception"). 26 When more than one transmitter is used 1. User shall remove all the batteries from the temperature station and transmitters and wait 60 seconds if setting has been done with one transmitter before. Within 30 seconds of powering up the first transmitter, insert the batteries to the Temperature Station. [. . . ] To install and replace the batteries, please follow the steps below: 1. Replace the battery holder to the unit. 29 Note: In the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the Temperature Station in the first few minutes of power supplying. BATTERY CHANGE: It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of these units. Return used batteries to an authorised depot. 30 FUNCTION KEYS: Temperature Station: The Temperature Station has only four easy to use function keys. Set Key Channel key + key Min/max key Set key (Setting) · Press and hold for about 3 seconds to enter the Manual setting mode. This key provides the following functions: 12/24 hour display, Manual time setting 31 min/max key (Min/ Max temperature) · Used to toggle between the minimum and maximum recorded readings of indoor & outdoor temperature. · Press and hold to reset minimum and maximum record when min or max record is shown. Ch key (Channel) · To toggle between the Outdoor transmitters 1, 2 and 3 (if more than 1 transmitter is used) · Before pressing the min/max key, user should press this key first in order to view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature, and the current value in the next channel. 32 LCD Screen and settings: Time *When the signal is successfully received by the temperature station, this icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is being done now. For better distinctness the LCD screen is split into 3 sections displaying the information for time, indoor temperature, and outdoor temperature. Indoor Temperature in ° C Outdoor Temperature in ° C Outdoor Reception Signal icon* Receiver Low battery indicator Transmitter Low battery indicator 33 Transmitter Low battery indicator Section 1 - TIME · Display of time. Section 2 - INDOOR TEMPERATURE · Display of indoor temperature Section 3 - OUTDOOR TEMPERATURE · Display of the outdoor temperature. MANUAL SETTING: 12 / 24- HOUR TIME DISPLAY SETTING AND TEMPERATURE UNIT (°C/°F) SETTING °° User may choose to display the time in 12-hour or 24-hour mode: Note: When the time display is set as 12-hour mode, the temperature unit will be fixed to °F; when the time mode is in 24-hour, the temperature unit will be fixed to °C. 34 1. 3. In normal display mode, press and hold the set key for about 3 seconds. Press shortly the set key to advance to the MANUAL TIME SETTING. MANUAL TIME SETTING User shall manually set the time of Temperature Station by the following steps: 1. Press the + key to adjust the hour (Press and hold to allow fast advancing). Press the + key to adjust the minute (Press and hold to allow fast advancing). Press set key once more to return to normal display. VIEWING THE MINIMUM AND MAXIMUM READINGS: User may view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature data records by the following steps: 35 1. Press the min/max key once to view the minimum indoor temperature, minimum outdoor temperature. 2. Minimum icon Press the min/max key once more to view the maximum indoor temperature, maximum outdoor temperature. Maximum icon 36 VIEWING THE MINIMUM AND MAXIMUM READINGS OF THE NEXT CHANNEL: User can choose to view the minimum and maximum indoor temperature, minimum and maximum outdoor temperature of the other channels. To view the readings of the next channel, user should make the following steps: 1. Press the min/max key once to view the minimum indoor temperature, minimum outdoor temperature in the next channel. Press the min/max key once more to view the maximum indoor temperature, maximum Outdoor temperature in the next channel. RESETTING THE MINIMUM AND MAXIMUM READINGS: User may reset the minimum and maximum temperature data to the current value by the following steps: 1. Press and hold the min/max key for about 3 seconds to reset the indoor and outdoor temperature of the three channels to the current values in a single action. All outdoor and indoor temperature records will be reset at the same time. [. . . ] Please contact your local or/and regional authorities to retrieve the addresses of legal dumping grounds with selective collection. User shall take an active part in the reuse, recycling and recovery of the electrical and electronic waste. The unrestricted disposal of electronic waste may do harm on public health and the quality of environment. As stated on the gift box and labeled on the product, reading the "User manual" is highly recommended for the benefit of the user. [. . . ]