User manual LA CROSSE TECHNOLOGY WS8005

[. . . ] WS 8005 Manual Technical data: DCF-77 Radio controlled Clock Time in 12/24 hour format Manual time setting option Time Zone setting: -12/+12h Continuous calendar up to year 2054 Date and weekday display Temperature display in °C or ° F Weekday display in seven languages: English, German, Italian, French, Danish, Dutch, Spanish Alarm with Snooze function Thermometer: Indoor measurement ranges: -9. 9° ~ 5 9. 9° C C Battery: 1. 5V "AA" size x 2pcs (not included) Important information: When you insert the batteries all the symbols on the display will briefly light up and you will hear a signal tone, LCD full display for 2 seconds with beeping, then enter RCC reception for seven minutes. If this automatic setting process is unsuccessful, then use a sharply pointed instrument to press the Reset button on the rear side of the clock. Manual time setting: Press and hold down the "SET" button for 2 seconds, the 12/24 hour mode display starts to flash. [. . . ] Now use "" and "" buttons to set the correct month. Press "SET" to confirm your setting, the Date display starts to flash. Now use "" and "" buttons to set the correct date. Press "SET" to confirm your setting, the language selection for the Weekday displays starts to flash. Press "SET" to confirm your setting and to end the setting procedures, enter the clock mode. Info: After 30 seconds without pressing any button, the clock switches automatically from set mode to normal time mode. Setting the daily alarms: To view the set alarm times, under the clock mode, press once ALARM button, LCD displays the "" icon. Press and hold down the ALARM button for 2 seconds until Alarm Time flashing icon is displayed. Now use the "" and "" buttons to select the alarm time you require and briefly press the ALARM button to set this Alarm time. Use the "" and ""buttons to set the required hour. Press ALARM button to confirm your setting WS 8005 Manual The Minute display of the Alarm time starts to flash. Use the "" and ""buttons to set the required minute. Press ALARM button to confirm your setting and to end the setting procedure. To activate or deactivate the daily alarms, briefly press the "ALARM" button once. Info: After 30 seconds without pressing any button the clock switches automatically from setting mode to Normal clock mode. The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. Rising alarm sound changes the frequency 4 times while the alarm signal is heard. Automatic Snooze function: Proceed as follows to activate the automatic Snooze function: While the alarm is sounding, press the SNOOZE button to activate snooze function. [. . . ] If no signals received within 7 minutes, then the DCF signal search stops (the radio mast icon disappears) and start again at the next full one hour. During RC reception to stop searching radio signal, press the "WAVE" button once. Info: A flashing radio mast icon indicates that the DCF signal reception has started A continuously displayed radio mast icon indicates that the DCF signal was received successfully We recommend a minimum distance of 2. 5 meters to all sources of interference, such as televisions or computer monitors Radio reception is weaker in rooms with concrete walls (e. g. : in cellars) and in offices. [. . . ]