User manual LA CROSSE TECHNOLOGY WS8002

[. . . ] Press "SET" to confirm your setting, the Minute displays starts to flash. Now use "" and ""buttons to set the correct minute. Press "SET" to confirm your setting, the Year display 2004 starts to flash. [. . . ] Press ALARM button to confirm your setting The Minute display of the Alarm time starts to flash. Use the "" and ""buttons to set the required minute. Press ALARM button to confirm your setting and to end the setting procedure. To activate or deactivate the daily alarms, briefly press the "ALARM" button once. Info: After 30 seconds without pressing any button the clock switches automatically from setting mode to Normal clock mode. The alarm will sound for 2 minutes if you do not deactivate it by pressing any button. Rising alarm sound changes the frequency 4 times while the alarm signal is heard. Automatic Snooze function: Proceed as follows to activate the automatic Snooze function: While the alarm is sounding, press the SNOOZE button to activate snooze function. This operation moves the alarm back by 5 minutes and the alarm will restart at this time. The Snooze function can be interrupted by pressing any button. ° F temperature display: C/° The temperature is displayed either in ° or ° Br iefly pressing the " "button allows you to switch between the C F. Care and Maintenance: · Extreme temperatures, vibration and shock should be avoided as these may cause damage to the unit and give inaccurate forecasts and readings. Injuries, burns, or property damage may be resulted if the batteries are in contact with conducting materials, heat, corrosive materials or explosives. The batteries shall be taken out from the unit before the product is to be stored for a long period of time. · Immediately remove all low powered batteries to avoid leakage and damage. · When cleaning the display and casings, use a soft damp cloth only. Do not use solvents or scouring agents as they may mark the LCD and casings. · Special care shall be taken when handling a damaged LCD display. Return them to their original point of purchase for repair by a qualified engineer. [. . . ] The manufacturer and supplier cannot accept any responsibility for any incorrect readings and any consequences that occur should an inaccurate reading take place. This product is not to be used for medical purposes or for public information. This product is only designed to be used in the home as indication of the future weather and is not 100% accurate. [. . . ]