User manual LA CROSSE TECHNOLOGY WS-9210U

[. . . ] WS-9210U Wireless 433 MHz Radio-controlled Temperature Station Instruction Manual Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery Installation Program Mode Programming Sequence Function Keys 12/24 Hour Time Setting Time Zone Setting Daylight Saving Time Setting Time Setting (WWVB & Manual) Setting Day, Date and Year Selecting °F or °C Setting the LCD Contrast Features Indoor Temperature Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor & Resetting) Alarm (Setting, Snoozing & Stopping) Additional Remote Temperature Sensor Units (Set-Up, Viewing & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 4 5 6 7 7 7-8 8 8-9 9-10 10 11 11 12 12 13 14 14-15 16-17 18 18 19 19-21 2 Table Of Contents INVENTORY OF CONTENTS 1. One TX6U remote temperature sensor with mounting bracket Three each, ½" Philips screws. (Figure 2). Time LCD Date LCD Indoor LCD Outdoor LCD Figure 2 Wireless Temperature Sensor Figure 1 *LCD = Liquid Crystal Display ADDITIONAL EQUIPMENT (not included) 1. One, Philips screwdriver for mounting. 3 Mounting Bracket ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. [. . . ] Press and release the "SET" button 9 times to reach the °F or °C setting mode. "°F" is the default setting, and should be flashing in the DATE LCD. Press the "IN" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears above the indoor temperature in the INDOOR LCD indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "IN" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. VIEWING THE OUTDOOR TEMPERATURE RECORDS Press the "OUT" button once. "MIN" appears above the outdoor temperature in the OUTDOOR LCD, indicating that the minimum temperature and the time and date of occurrence are displayed. Press the "OUT" button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears above the outdoor temperature in the OUTDOOR LCD, indicating that the maximum temperature and the time and date of occurrence are displayed. While "MAX" is still displayed press the "OUT" button again to return to the current data display. By waiting 20 seconds during either the minimum or the maximum readings the unit will automatically return to current data readings. RESETTING THE MIMIMUM AND MAXIMUM RECORDS All the indoor records (minimum and maximum) will be reset after the "IN" button is pressed and held for 5 seconds. All the outdoor records (minimum and maximum) will be reset after the "OUT" button is pressed and held for 5 seconds. 2. 3. B. SETTING THE ALARM (alarms 1 and 2) Note: There are two alarms that can set. Press and hold the "AL1" button for 5 seconds or until the alarmtime display flashes in the DATE LCD. Press and release the "IN" button to set the alarm hours, press and release the "OUT" button to set the alarm minutes. Press the "AL1" button or wait 15 seconds for the unit to automatically confirm the alarm time and return to display the date in the DATE LCD as normal. The ((1)) icon, appearing in the DATE LCD, indicates that the alarm is set to sound at the programmed time. Programming the alarm time automatically activates the alarm to sound at the programmed time. To deactivate the alarm, press the "AL1" button (removing the ((1)) icon from the screen). After each activation or deactivation, the programmed alarm time is displayed. [. . . ] Immediately remove all low powered batteries to avoid leakage and damage. Contact La Crosse Technology for repairs. 18 SPECIFICATIONS Temperature measuring range: Indoor: Outdoor: Indoor temperature checking interval: Outdoor temperature checking interval: (Remote Temperature Sensor) Outdoor temperature reception: (Indoor Weather Station) Transmission Range: Power Supply: Indoor Weather Station: Remote Temperature Sensor: Battery life cycle: Recommended battery type: Dimensions (H x W x D) Indoor Weather Station (without stand): Remote Temperature Sensor: 32°F to 139°F with 0. 2°F resolution (0°C to 59. 9°C with 0. 1°C resolution) "OFL" displayed if outside this range -21. 8°F to 157. 2°F with 0. 2°F resolution (-29. 9°C to 69. 9°C resolution) "OFL" displayed if outside this range Every 10 seconds Every 1 minute Every 5 minutes 80 feet (in open space) 2 x AA, IEC LR6, 1. 5V 2 x AA, IEC LR6, 1. 5V Approximately 12 months Alkaline 5. 75 x 3. 37 x 1. 25 inches (146 x 86 x 32 mm) 5. 04 x 1. 57 x 0. 9 inches (128 x 40 x 23 mm) WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. [. . . ]