User manual LA CROSSE TECHNOLOGY WS-9065TWC

[. . . ] WS-9065TWC Wireless 433 MHz Radio-controlled Weather Station Instruction Manual TABLE OF CONTENTS Topic Inventory of Contents/Additional Equipment About WWVB Quick Set-Up Guide Detailed Set-Up Guide Battery installation Program Mode Program Sequence and Default Settings Function Keys Setting the LCD Contrast Setting the Time Zone Daylight Saving Time Setting Radio-controlled Time Setting 12/24-hour Time Setting Setting the Time Setting the Year, Day and Month Setting the Snooze Setting the Temperature Format Setting the Forecast Sensitivity Features Weather Forecast Icons and Tendency Arrows Indoor Temperature, Humidity, & Comfort Level Indicator Outdoor Temperatures Minimum & Maximum Records (Indoor, Outdoor, & Resetting) Additional Remote Control Sending Units (Set-Up, Viewing, & Operation) Mounting Troubleshooting Maintenance & Care Specifications Warranty Information Page 3 3 4 5 6 6 6-7 7 7-8 8 8 9 9-10 10 10 10-11 11-12 12 13 13-14 14-15 15-17 17-18 18 19 20-21 2 INVENTORY OF CONTENTS 1. Figure 1 Figure 2 Time LCD Date LCD Forecast LCD Indoor LCD Outdoor LCD Mounting Bracket TX6U remote temperature sensor ADDITIONAL EQUIPMENT (not included) 1. One, Philips screwdriver for mounting. ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and Technology--Time and Frequency Division) WWVB radio station is located in Ft. Collins, Colorado, and transmits the exact time and date signal continuously throughout the United States at 60 kHz. [. . . ] The comfort level indicator is located at the center of the INDOOR LCD. The indicator will display a happy face icon when the temperature is between 68°F and 79°F (20°C and 25. 9°C), and the humidity is between 45% and 65%. A sad face icon will be displayed when the temperature and humidity are outside the mentioned ranges. 12 III. OUTDOOR TEMPERATURE The temperature received from the remote temperature sensor is viewed in the OUTDOOR LCD. When there is more than one remote temperature sensor unit in operation, a "boxed" number will appear to the right of the temperature. This indicates which remote temperature sensor unit (1, 2, or 3) is currently displaying its data in the OUTDOOR LCD. (This feature is explained in further detail in section V--Adding Remote Temperature Sensors). MINIMUM AND MAXIMUM TEMPERATURE RECORDS The WS-9065U keeps a record of the MINIMUM and MAXIMUM temperature, and the time and date of their occurrence--for both the indoor and outdoor modes. A. VIEWING THE INDOOR TEMPERATURE RECORDS 1. "MIN" appears above the indoor temperature and the LCD will flash, indicating that the minimum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. The minimum records will display for 30 seconds before returning to the normal display mode. 2. 3. Press the IN button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears above the indoor temperature and the LCD will flash, indicating that the maximum temperature (along with the humidity measured at that time) and the time and date of occurrence are displayed. While "MAX" is still displayed press the IN button again to return to the current data display. Or you can wait 30 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. B. VIEWING THE OUTDOOR TEMPERATURE RECORDS 1. "MIN" appears above the outdoor temperature and the LCD will flash, indicating that the minimum temperature, and the time and date of occurrence are displayed. The minimum records will display for 30 seconds before returning to the normal display mode. 13 2. Press the OUT button again (once while "MIN" is still displayed, twice otherwise). "MAX" appears above the outdoor temperature and the LCD will flash, indicating that the maximum temperature and the time and date of occurrence are displayed. 3. While "MAX" is still displayed press the OUT button again to return to the current data display. Or you can wait 30 seconds, during either the minimum or the maximum readings, and the unit will automatically return to current data readings. C. 2. RESETTING THE MIMIMUM AND MAXIMUM RECORDS All the Indoor records (minimum and maximum) will be reset after the IN button is pressed and held for 5 seconds. All the Outdoor records (minimum and maximum) will be reset after the OUT button is pressed and held for 5 seconds. V. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-9065U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions--follow these instructions for a complete guide to setting up. Following are some brief instructions for the basic set-up of remote temperature sensor units with the WS-9065U. [. . . ] This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. [. . . ]