User manual LA CROSSE TECHNOLOGY WS-7097U

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual LA CROSSE TECHNOLOGY WS-7097U. We hope that this LA CROSSE TECHNOLOGY WS-7097U user guide will be useful to you.


LA CROSSE TECHNOLOGY WS-7097U : Download the complete user guide (493 Ko)

Manual abstract: user guide LA CROSSE TECHNOLOGY WS-7097U

Detailed instructions for use are in the User's Guide.

[. . . ] Reset Unscrew the screw on the back of the Outdoor temperature sensor compartment and remove the cover. Insert the 2 x AAA, IEC LR3, 1. 5V batteries observing correct polarity. Replace battery cover on unit and seal by re-screwing When replacing the battery covers, ensure that the batteries do not spring free from the contacts. Your World Time Center and Outdoor temperature sensor are now operational. To reset the World Time Center and the Outdoor temperature sensor, simply take out the batteries from both unit. [. . . ] I. e. , it is not possible to set the date 30 if the month of February is selected. Press the "SET" key to enter the mode "Setting of Year". + Key · Serves in programming mode the change/selection of all changeable/selectable values and displays. Manual programming Note: If the World Time Center has already successfully received the WWVB time signal and displays the correct time and date, then the Manual programming can be omitted. After completion of the above described procedures in "Basic Setup" the manual programming mode can be entered by pressing the "SET" key for about 2 seconds. The following settings can now be programmed: · · · · · · · · · · 12/24 hour setting Time setting Weekday setting Month setting Date setting Year setting World Time location setting World Time setting ºC or ºF setting LCD contrast setting 2. Year Setting 1. Note: The year can be selected sequentially from 1998 to 2020 and will then start over again. The year furthermore will only be visible on the display of LCD 1 in programming mode. Press the "SET" key to switch to the mode "Worldtime Location Setting". 3. Worldtime Location Setting 1. The dash representing the first character of the worldtime location (Default setting - - -) on LCD 1 will start flashing. Note: For designation of the worldtime location the characters "A" through "Z" and "0" as well as "-" and " " (Space) can be chosen. Before securing the transmitter to the desired location, check that the temperature can be received first. To affix by screw, follow these steps: Reset of all Data By removing the batteries from both World Time Center and Temperature sensor all displayed data will be lost. To reset all data perform a basic setup as described in "Reset" above. Data Reception Criteria for Reception For reception and computing of displayed values, the software of the World Time Center performs a number of comprehensive operations (see Index) which are not necessarily important for the user to know. In case the time is not correctly displayed on LCD 2, then please see " WWVB Reception Check". WWVB-Signal Test The World Time Center will automatically start scanning for the WWVB frequency signal (time signal transmission) after the batteries are inserted. at a safe distance from interferring sources such as TV sets), it takes between 3 to 5 minutes to receive the signal. If after 10 minutes of inserting the batteries the WWVB signal is not properly received then check the following list before manually setting the time (see "Time Setting") in programming mode. The distance of the units should be at least 1. 5 - 2. 0 Meters away from interferring sources such as computer monitors or TV sets. Avoid placing the units onto or in the immediate proximity of metal window frames. Within thick concrete rooms such as basements and tower blocks, the WWVB frequency signal is naturally weaker for reception. In extreme cases, place the unit closer to a window and/or point its front or rear towards the general direction of NIST Radio Station WWVB in Ft. Collins, Colorado (again avoid placing near metal frames or structures). 1. 3. Using the holes in the holder as a guide, mark the holes on the drilling surface. [. . . ] E. g. , if the current weather is cloudy and the rain icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily raining. Weather Tendency Because of the combination of weather icons and weather tendency arrows, the World Time Center can also show how the weather has changed and is expected to change. E. g. , if the tendency arrow pointing downwards is displayed along with the cloud and sun symbols then the last noticeable change in the weather was when it was sunny (sun icon only). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LA CROSSE TECHNOLOGY WS-7097U




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LA CROSSE TECHNOLOGY WS-7097U will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.