User manual LA CROSSE TECHNOLOGY WS-2815U-IT

[. . . ] If not, press the appropriate key to advance to the correct number (indoor, wind, or rain). You may press the "Unit" key to switch between °F or °C. The outdoor temperature and humidity sensor should be mounted in the shade with enough reflected light to power the solar panel; placement on the East side of a house with two or three hours of cool morning sun works very well. While not much light is required, enough light to power a solar-powered calculator is needed. [. . . ] The solar panel needs to face due South for a reference point for direction. The mast it is mounted on needs to be stable and not subject to vibrations. The rainfall sensor should be mounted in the open on a horizontal surface. Leaves and other debris may collect in the bucket and should be cleaned once in a while. The indoor sensor should be mounted in a location where main indoor temperature measurement is desired. The transmission signal travels in a straight line from the sensor to the display/receiver. Any obstacles in this path may cause interference and limit the range. A typical wall will decrease the signal range about thirty feet (300 feet is the rated range in free space). Operating Tips 1. Minimum and maximum values are stored for all data (no minimum rain or wind). While viewing all minimum or maximum data, press the or keys to scroll through each value with the corresponding time and date of occurrence. To exit this mode, view all minimum or maximum values and press the "Min/Max" key to exit. WS2010-20 indoor temperature, humidity, and pressure sensor is included, and no more may be added. WS2010-25 outdoor temperature and humidity (solarpowered) is included, and may be ordered as an addition. WS2010-22 indoor temperature and humidity (battery operated) looks the same as the WS2010-20. Used for measuring water or soil temperature (includes a 10 foot cable with thermometer on the end). Unlimited numbers of displays can be used off the same set of sensors. Also useful for collecting the data from a roof-mounted wind sensor and re-transmitting it through one wall instead of through several floors. This collects and stores all the data from the sensors, and is downloaded to a computer through a serial port via the included software. All information can be exported as an ASCII file for use in other programs such as Excel. Third party software is available to design and update web pages with this information. For questions or warranty work, please contact us: La Crosse Technology 1116 South Oak Street La Crescent, MN 55947 (507) 895-7095 (507) 895-8000 fax www. lacrossetechnology. com support@lacrossetechnology. com Check our website for current updates, instructions, and new products. We maintain our own database and use this for e-mailing updates and special offers, perhaps once a month. [. . . ] Any request to remove from a mailing list is honored. WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this weather station. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the Weather Station in for repairs, contact La Crosse Technology. The Weather Station will be repaired or replaced with the same or similar model. [. . . ]