User manual LA CROSSE TECHNOLOGY KCOMBO3 WS-9080U

[. . . ] Contents Language Page ___________________________________________________________________ English French Spanish 1 35 37 1 TABLE OF CONTENTS Topic Inventory of Contents Features Setting Up Battery Installation Function keys LCD Screen and Settings Atomic time -WWVB Radio Controlled Time Manual Settings Weather Forecast and Tendency Display of Indoor Temperature and Humidity Reading Display of Outdoor Temperature Reading Display of Outdoor Minimum and Maximum records Display of Indoor Minimum and Maximum records Ice Alarm 915 MHz Reception Mounting Care and Maintenance Specifications Warranty Information Page 3 4 6 8 10 12 14 15 20 22 22 23 24 26 27 28 31 32 33 2 This product offers: INSTANT TRANSMISSION is the state-ofthe-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the transmitters: follow your climatic variations in real-time! INVENTORY OF CONTENTS 1. Wireless Weather Station Wireless Temperature Sensor (TX29U) and mounting bracket. Instruction Manual and Warranty Card. ADDITIONAL EQUIPMENT (not included) 1. [. . . ] After inserting the batteries into the sensor, the Temperature Station will start receiving data from the sensor. The outdoor temperature and the signal reception icon should then be displayed on the Temperature Station. If this does not happen after 5 minutes, the batteries will need to be removed from both units and reset from step 1. In order to ensure sufficient 915 MHz transmission however, there should be no more than 330 feet (100 meters) between the final position of the Temperature Station and the sensor (see notes on "Mounting" and "915 MHz Reception"). Once the remote temperature has been received and displayed on the Temperature Station, the WWVB time code reception is automatically started. This takes typically between 3-5 minutes in good conditions--but may take up to 4 nights. If after 10 minutes, the WWVB time has not been received, press the SET key to manually enter a time initially. When more than one sensor is to be used 1. User shall remove all the batteries from the Temperature Station and sensors and wait 60 seconds if setting has been done with one sensor before. Within 60 seconds of powering up the first sensor, insert the batteries into to the 7 4. 5. Once the batteries are in place, all segments of the LCD will light up briefly. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. The outdoor temperature from the first sensor (channel 1) should then be displayed on the Temperature Station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1. Insert the battery into the second sensor immediately after (within 30 seconds after) inserting battery to the Temperature Station. The outdoor temperature from the second sensor and the "channel 2" icon should then be displayed on the Temperature Station. If this does not happen after 2 minute, the batteries will need to be removed from all the units and reset from step 1. Insert the batteries into the third sensor immediately after (within 30 seconds after) inserting battery to the second sensor. Then within 2 minutes, the channel 3 outdoor data from the third sensor will be displayed and the channel icon will shift back to "1" once the third sensor is successfully received. In order to ensure sufficient 915 MHz transmission there should be a distance of no more than 330 feet (100 meters) between the final position of the Temperature 8 Station and the sensor (see notes on "Mounting" and "915 MHz Reception"). Note: · · Transmission problems will arise if the setting for additional sensors is not followed as described above. Should transmission problems occur, it is necessary to remove the batteries from all units and follow the set-up from step 1. If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the frequency is changed to 920MHz and the learning is tried for another 45 seconds. [. . . ] Immediately remove all low powered batteries to avoid leakage and damage. Replace only with new batteries of the recommended type. 36 · · Do not make any repair attempts to the unit. Return them to their original point of purchase for repair by a qualified engineer. Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy. SPECIFICATIONS: Temperature measuring range: Indoor : 32°F to +139. 8°F with 0. 2°F resolution (0ºC to +59. 9ºC with 0. 1ºC resolution, "OF. L" displayed if outside this range) Outdoor : -39. 8°F to +157. 8°F with 0. 2°F resolution (-39. 9ºC to +69. 9ºC with 0. 1ºC resolution, "OF. L" displayed if outside this range) Indoor temperature checking interval : every 15 seconds Outdoor data reception : approximately every 4 seconds Power supply: Temperature Station Temperature Sensor : : 2 x AAA, IEC, LR3, 1. 5V 2 x AA, IEC, LR6 1. 5V 37 Battery life (Alkaline batteries recommended) Temperature Station : Approximately 12 months Temperature Sensor : Approximately 12 months Dimensions (L x W x H) Temperature Station : Temperature Sensor : 3. 74" x 0. 74" x 5. 35" (95 x 18. 8 x 136 mm) 1. 50" x 0. 83" x 5. 05" (38. 2 x 21. 2 x 128. 3 mm) WARRANTY La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. [. . . ]