User manual LA CROSSE TECHNOLOGY K86302

[. . . ] Avoid direct rain and sunshine Note: Always wait for 2 minutes after removing the batteries before reinserting, otherwise start up and transmission problems may occur. In the event of changing batteries in any of the units, all units need to be reset by following the setting up procedures. BATTERY CHANGE It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units (Battery life See Specifications below). Return used batteries to an authorized depot. INITIAL SET UP FUNCTION KEYS DO NOT MIX OLD AND NEW BATTERIES. Keep the transmitter 5-10 feet from the Weather Station during set up. [. . . ] City code (flashing) WEATHER FORECASTING ICONS Weather icons can be displayed in any of the following combinations: Sunrise icon Sunset icon Sun Sun with cloud Cloud with rain Sunrise time of selected city 5. 7. Sun duration (hours : minutes) Sunset time of selected city Press the SUN key twice to go back to normal date display. User can exit the setting mode by pressing the SET key or ALARM key without saving the changes. To select a Canadian city: 1. Country code (flashing) Once "CAN" has been selected, press the SUN key to enter the city setting. The city's sunrise, sun duration and sunset time will be displayed in a few seconds. For every sudden or significant change in the air pressure, the weather icons will update accordingly to represent the change in weather. If the icons do not change, then it means either the air pressure has not changed or the change has been too slow for the Weather station to register. However, if the icon displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny icon) or worse (with rainy icon) since the icons are already at their extremes. The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it does not mean that the product is faulty because it is not raining. It simply means that the air pressure has dropped and the weather is expected to get worse but not necessarily rainy. Note: After setting up, readings for weather forecasts should be disregarded for the next 48 hours. it should not be moved from the ground to the second floor of the house). When the unit is moved to a new location, discard readings for the next 48 hours. DISPLAY OF INDOOR TEMPERATURE The indoor temperature is measured automatically and displayed on the upper left corner of the LCD. Indoor temperature in °F POSITIONING WEATHER STATION: The weather station comes complete with a foldout stand that gives the option of table standing or wall mounting. DISPLAY OF OUTDOOR TEMPERATURE The upper right of the LCD section shows the outdoor temperature and a reception symbol. Outdoor reception symbol Outdoor temperature in qF DISPLAY OF INDOOR/OUTDOOR MAXIMUM AND MINIMUM RECORDS Press the MIN/MAX key several times to view the MIN/MAX indoor temperature, and MIN/MAX outdoor temperature sequentially. Date and time of recordings will be shown for outdoor data. To wall mount: 1. Fix a screw into the desired wall, leaving the head extended out by about 0. 2" (5mm). Using the weather station hanging hole, carefully hang it onto the screw. Note: Always ensures that the unit locks onto the screw head before releasing. RESETTING THE MAXIMUM/MINIMUM RECORDS To reset the MIN/MAX records, press and hold the MIN/MAX key for 2 seconds. This will reset ALL minimum and maximum temperature records to current readings. 4 POSITIONING THE TEMPERATURE TRANSMITTER: The temperature transmitter can be placed on any flat surface or wall mount using the bracket which doubles as a stand or wall mount base. replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting your La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. To wall mount: 1. [. . . ] To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. [. . . ]