User manual LA CROSSE TECHNOLOGY C86234

[. . . ] C86234 Wireless Professional Weather Center Operations Manual Revision: 7 INTRODUCTION Congratulations on purchasing this state-of-the-art weather station. Featuring time, date, weather forecast, wind gust and wind speed, indoor/outdoor temperature and humidity, air pressure and rainfall, this weather station will provide various weather information and weather forecasts. Heavy Weather Pro software allows you to use a PC to monitor and record weather data received from the La Crosse Technology® wireless weather station via a proprietary USB device that was provided. Monitor and record a variety of data collected by the weather station including both indoor and external values sampled by the various weather station sensors. [. . . ] TO EXIT THE MANUAL SETTING MODE: To exit the manual setting at any time, either:   Press the MIN/MAX button or the ALARM button to exit SET mode, or Simply wait 30 seconds until the SET mode times out and returns to the Mode 1 display. WEATHER ALARM OPERATIONS FOR THE WEATHER STATION DISPLAY The Weather alarms can be set when certain weather conditions are met. For example, you can set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling the high alarm and disabling the low alarm (i. e. temperatures <14°F won’t trigger alarm, but temperatures >+104°F will).      When the value meets the condition for high alarm or low alarm, the alarm will ring for 2 minutes and the value will blink, along with the corresponding icon ("HI AL"/ "LO AL"). The high and low alarms can be switched On/Off independently, according to the needs. If at any time during the alarm setting process you would like to exit alarm setting mode, press the MIN/MAX button or wait for about 30 seconds and the display will return to normal display mode automatically. Subsequent presses of the ALARM button will advance to the next weather alarm section. Note: Weather alarms can also be set from the Heavy Weather Pro software. Consult the Heavy Weather Pro Software User’s Guide for instructions. Note: Remote Monitoring and Alerts Activation Card has instructions for downloading the La Crosse Alerts software and the needed activation key to enable this feature. THE FOLLOWING WEATHER ALARMS CAN BE SET IN ALARM MODE:         High and Low pressure alarms High and Low indoor temperature alarms High and Low indoor humidity alarms High and Low outdoor temperature alarms High and Low outdoor humidity alarms High wind gust alarm Wind direction alarm Rainfall amount in 24 hour period alarm P a g e | 15 DEFAULT WEATHER ALARM VALUES: Pressure Temperature (In or Out) Relative Humidity (In or Out) Low High Low High Low High 28. 35 inHg 30. 71 inHg 32F 104F 45% 70% Wind gust Wind Direction Rainfall in 24 hours High 62. 0mph North High 1. 96 in PRESSURE ALARMS: 1. Press the ▲/DATE button or ▼/RAIN button to set the highpressure alarm value. Press the ▲/DATE button or ▼/RAIN button to set the lowpressure alarm value. Press the ▲/DATE button or ▼/RAIN button to set the high indoor temperature alarm value. The ((())) icon indicates that the alarm is switched on. P a g e | 16 6. Press the ▲/DATE button or ▼/RAIN button to set the low indoor temp alarm value. Press the ▲/DATE button or ▼/RAIN button to set the high indoor humidity alarm value. Press the ▲/DATE button or ▼/RAIN button to set the low indoor humidity alarm value. Press the ▲/DATE button or ▼/RAIN button to set the high outdoor temp alarm value. Press the ▲/DATE button or ▼/RAIN button to set the low outdoor temp alarm value. Press the ▲/DATE button or ▼/RAIN button to set the high outdoor humidity alarm value. Press the ▲/DATE button or ▼/RAIN button to set the low outdoor humidity alarm value. Press the ▲/DATE button or ▼/RAIN button to set the wind gust alarm value. WIND DIRECTION ALARM: Multiple wind direction alarms can be set simultaneously if desired. [. . . ] Statement according to FCC part 15. 105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]