User manual LA CROSSE TECHNOLOGY 616-146

[. . . ] Once the batteries are in place, all segments of the LCD will light up briefly. Following, the indoor temperature/humidity and the time, as 12:00 will be displayed. If this information is not displayed on the LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. After the batteries are inserted, the weather station will start receiving data signal from the transmitter. [. . . ] The user can then easily see whether the last reception was successful (icon on) or not (icon off). MANUAL SETTINGS: The following manual settings can be changed when pressing the SET key for: x 12/24 time display setting x Manual time setting x Calendar setting x ºF/ºC temperature display setting LCD SCREEN The LCD screen is split into 4 sections displaying the information for time/calendar, moon phase, indoor data, and outdoor data. Time Calendar Low battery indicator (weather station) Indoor relative humidity in RH% Outdoor relative humidity in RH% RH 12/24 HOUR TIME DISPLAY SETTING flashing Moon phase icon Indoor temperature in ºC/ºF Outdoor temperature in ºC/ºF To set the time format in 12h or 24h display: 1. Press the + key to select the "12h" or "24h" display mode. Confirm with the SET key and enter the "Manual time setting". Note: When 12h mode display is selected, the calendar format will be "Month. When 24h mode display is selected, the calendar format will be "Day. Month" display. Outdoor data signal reception indicator* Low battery indicator (transmitter) * When the signal is successfully received by the weather station, the outdoor transmission icon 7 8 MANUAL TIME SETTING: To set the time. 3. 4. Confirm with the SET key and enter the Calendar setting. 7. Press the SET key again to confirm and to enter the month setting. Press the SET key again to confirm and to enter the date setting mode. Confirm all calendar settings with the SET key and "ºF/ºC temperature display setting". °F/°C TEMPERATURE UNIT SETTING flashing 5. CALENDAR SETTING: The date default of the weather station is 1. To set the calendar: Year The default temperature display is set to °F (degree Fahrenheit). Use the + key to toggle between "°C" and "°F". Immediately remove all low powered batteries to avoid leakage and damage. Return it to their original point of purchase for repair by a qualified engineer. Do not expose the units to extreme and sudden temperature changes, this may lead to rapid changes in forecasts and readings and thereby reduce their accuracy. SPECIFICATIONS: To wall mount: 1. Secure the bracket onto a desired wall using the screws and plastic anchors. Temperature measuring range: Indoor : 14. 2°F to +139. 8°F with 0. 2°F resolution -9. 9ºC to +59. 9ºC with 0. 1°C resolution ("OF. L" displayed if outside this range) 15 16 Outdoor : -39. 8°F to +139. 8°F with 0. 2°F resolution -39. 9ºC to +59. 9ºC with 0. 1°C resolution ("OF. L" displayed if outside this range) Indoor humidity range: 20% to 95% with 1% resolution (Display "- -"if temperature is OF. L; display "19%"if < 20% and "96%" if > 95%) Outdoor humidity range: 1% to 99% with 1% resolution (Display "- -"if outside temperature is OF. L; display 1% if < 1% and 99% if > 99%) Data checking intervals Indoor temperature: every 16 seconds Indoor humidity: every 64 seconds Outdoor temperature and humidity: every 4 seconds Transmission range: up to 260 feet (79. 2 meters) (open space) Power consumption (alkaline batteries recommended): Weather station: 2 x AAA, IEC LR3, 1. 5V Thermo-hygro transmitter: 2 x AAA, IEC LR3, 1. 5V Battery life: up to 24 months Dimensions (L x W x H): Weather station: 3. 22" x 0. 78" x 5" 81. 8 x 20 x 127. 1mm Thermo-hygro transmitter: 1. 41" x 0. 62" x 4. 03" 36 x 16 x 102. 6mm WARRANTY INFORMATION La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this product. To receive warranty service, the purchaser must contact La Crosse Technology, Ltd for problem determination and service procedures. Warranty service can only be performed by a La Crosse Technology, Ltd authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd's authorized service center. THIS PRODUCT IS NOT TO BE USED FOR MEDICAL PURPOSES OR FOR PUBLIC INFORMATION. Some States do no allow the exclusion of consequential or incidental damages therefore the above exclusion of limitation may not apply to you. [. . . ] Statement according to FCC part 15. 21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15. 105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]