User manual LA CROSSE TECHNOLOGY 308A-805

[. . . ]  The Temperature area will flash as the display searches for a signal from the outdoor transmitter.  Insert fresh alkaline batteries into the transmitter, observing the correct polarity Press the TX button to send a signal after the display is powered up.  Within 3 minutes the station will beep and the outdoor temperature should be displayed on the Weather station. If the outdoor temperature is not displayed after 3 minutes hold the SEARCH button on the main unit to search for outdoor sensor. [. . . ] RESET MIN/MAX: Hold the MIN/MAX button for 5 seconds to reset all min/max values. HEAT INDEX AND DEW POINT: NOTE: In case the atomic color weather station is not able to detect the WWVBsignal (disturbances, transmitting distance, etc. ), the time can be manually set (please refer to notes TIME SET). PROGRAM MENU: TIME SET: The SET button moves through the program menu and the UP or DOWN button change the values. North American Time Zones are:  -4 Atlantic  EST Eastern  CST Central  MST Mountain  PST Pacific  -9 Alaska  -10 Hawaii Press and release the SET button to continue. Press and release the UP or DOWN button to select the 12-hour or 24-hour time. WEATHER FORECAST ICON: Press and release the UP or DOWN button to select the forecast Icon that represents your current local weather. NOTE: If possible, it is best to select the RAINY ICON when it is raining outside. This allows for the most accurate future forecasts based on barometric pressure changes.          INDOOR: When Indoor Temperature/Humidity is displayed, press the HEAT/DEW button and Indoor Heat Index and Indoor Dew Point will show briefly in the date display area. OUTDOOR: When Outdoor Temperature/Humidity is displayed, press the HEAT/DEW button Outdoor Heat Index and Outdoor Dew Point will show briefly in the date display area. AUTO SWITCH INDOOR/OUTDOOR DATA: Press the AUTO button one time to enable the auto switch feature. This feature allows the station to alternately display indoor temperature/humidity and outdoor temperature/humidity every 10 seconds. The word AUTO will appear in the lower right display when this feature is active. BACKLIGHT: A/C adapter: The backlight can be on continuously when operation with the 6-volt a/c adapter.  OFF: Hold the LIGHT ON/OFF button for 5 seconds to turn off the backlight, to sleep. Battery power: The backlight will light for 8 seconds when operating on batteries only. LOW BATTERY: It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of this unit. A low battery icon will display next to the outdoor temperature when the transmitter batteries are low and next to the indoor temperature then the batteries in the weather station are low. MAINTENANCE Do not expose the display to extreme temperatures, vibration or shock.  The product is not to be used for medical purpose or for public information, but is determined for home use only.  The specifications of this product may change without prior notice. [. . . ] The original dated bill of sale must be presented upon request as proof of purchase to La Crosse Technology, Ltd or La Crosse Technology, Ltd’s authorized service center. La Crosse Technology, Ltd will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the property of La Crosse Technology, Ltd and must be returned to La Crosse Technology, Ltd. Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. [. . . ]