User manual LA CROSSE TECHNOLOGY 308A-146

[. . . ] 6 Features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wireless display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Thermohygro sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Wind sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press the SET key to confirm the month and enter the date setting mode. Press the SET key to confirm and to enter the °F/°C TEMPERATURE UNIT SETTING. °F/°C TEMPERATURE UNIT SETTING The temperature can be displayed in °F or °C. Press the UP ARROW key or DOWN ARROW key to toggle between "°F" or "°C". Press the SET key to confirm and to enter the WIND SPEED UNIT SETTING. WIND SPEED UNIT SETTING The wind speed unit can be set as mph (miles per hour), km/h (kilometers per hour), bft (Beaufort), knots, or m/s (meters per second). Press the UP ARROW key or DOWN ARROW key to toggle between the unit "mph", "km/h", "bft", "knots" or "m/s" 2. P a g e | 15 RAINFALL UNIT SETTING The rainfall unit can be set as inch or mm. Press the UP ARROW key or DOWN ARROW key to toggle between the unit "inch" or "mm" 2. Press the SET key to confirm and to enter the RELATIVE AIR PRESSURE UNIT SETTING RELATIVE AIR PRESSURE UNIT SETTING The relative air pressure can be set as inHg (inches of mercury) or hPa (hectopascal). Press the UP ARROW key or DOWN ARROW key to toggle between the unit "inHg" or "hPa" 2. If you do not wish to reset the display to factory defaults, either: Press the MIN/MAX key or the ALARM key to exit SET mode, or Simply wait 30 seconds until the SET mode times out and returns to the Mode 1 display. To reset the display to the factory defaults, follow the procedure below. WARNING: A factory reset will erase the connection between the display and the thermohygro sensor and require the connection to be reestablished. Press the SET key to confirm and a countdown timer will begin counting down from "127" When the timer displays "dOnE", you must remove the batteries from the display for 10 minutes. While the batteries are out of the display, also remove the batteries from the thermohygro sensor. After waiting for 10 minutes, insert the batteries into the thermohygro sensor, making sure to align the "+" symbol on the batteries with the markings on the battery cover and inside the battery compartment. Within 2 minutes of inserting the batteries into the thermohygro sensor, insert the batteries into the display, making sure to align the "+" symbol on the batteries with the markings inside the battery compartment. If any of the outdoor data displays "" after waiting for 5 minutes, follow the "Setting Up" Procedure near the beginning of this manual or in the Quick Set Up Manual included with the product. TO EXIT THE MANUAL SETTING MODE To exit the manual setting at any time during the manual setting modes, either: Press the MIN/MAX key or the ALARM key to exit SET mode, or Simply wait 30 seconds until the SET mode times out and returns to the Mode 1 display. WEATHER ALARM OPERATIONS The Weather alarms can be set when certain weather conditions are met according to your requirements. For example, you can set the thresholds for the outdoor temperature to +104°F (high) and 14°F (low), while enabling the high alarm and disabling the low alarm (i. e. [. . . ] (2) This device must accept any interference received, including interference that may cause undesired operation. Statement according to FCC part 15. 21: Modifications not expressly approved by this company could void the user's authority to operate the equipment. Statement according to FCC part 15. 105: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]