User manual LA CROSSE TECHNOLOGY 308-807

[. . . ] SEARCH IN / OUT LIGHT/SNOOZE MIN / MAX SET RCC SEARCH UP C/F DOWN LIGHT ON/OFF AUTO ROTATE IN / OUT ALARM WWVB RECEPTION icon with full signal strength will appear on screen if the reception of atomic time is successful. The atomic weather station will have a daily synchronization at 02:03 and 03:03 every day. In normal mode, press the RCC until the reception icon appears to enforce searching of radio-controlled clock signal. If this icon disappears afterwards, radio time signal is not available at the moment. SET UP: 1. [. . . ] Press and release the AUTO ROTATE IN / OUT button to turn the feature off again. BACKLIGHT: 10 Seconds with Battery Power Only: Press LIGHT / SNOOZE button to activate backlight for 10 seconds. Dimensions: Receiver: Transmitter: 6. 29"L x 2. 6"W x 4. 17"H (160 x 66 106mm) 2. 55"L x 1. 18"W x 3. 5"H 6 5 The complete instruction manual is available at: www. lacrossetechnology. com/308-807 Le manuel d'instruction complet est disponible sur: x www. lacrossetechnology. com/308-807 El manual de instrucciones completo está disponible en: 3 www. lacrossetechnology. com/308-807 0 Contact Support: 1-608-782-1610 Product Registration: x www. lacrossetechnology. com/support/register. php This Device complies with Part 15 of the FCC Rules. 9 Operation is subject to the following two conditions: (1) This 0 device may not cause harmful interference, and (2) the m device must accept any interference received, including m interference that may cause undesired operation. NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY ) RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER AUTHORITY TO OPERATE THE EQUIPMENT All rights reserved. This handbook must not be reproduced in any form, even in excerpts, or duplicated or processed using electronic, mechanical or chemical procedures without written permission of the publisher. The information in this handbook is regularly checked and corrections made in the next issue. We accept no liability for technical mistakes or printing errors, or their consequences. All trademarks and patents are acknowledged. Connect 6-volt A/C Power Adapter for Continuous Backlight: TURN OFF: Hold the LIGHT ON/OFF button for 3 seconds to turn off the backlight at night to sleep. (Press LIGHT / SNOOZE button to activate backlight for 10 seconds when light is turned off. ) TURN ON: Hold the LIGHT ON/OFF button to activate backlight. LOW BATTERY: It is recommended to replace the batteries in all units every 12 months to ensure optimum accuracy of this units. A single daily reception is adequate to keep the accuracy deviation below 1 second. 2 5 x button again on the sensor to send signal. If that doesn't work, remove power from both units and start again from the beginning. To ensure sufficient 434 MHz transmission, the outdoor transmitter should be placed a distance of no more than 200 feet (60 meters, open air) from the Color Weather station. NOTE: In case the atomic color weather station is not able to detect the WWVB-signal (disturbances, transmitting distance, etc. ), the time can be manually set (please refer to notes TIME SET). INSTALL BATTERIES OR A/C POWER ADAPTER INTO THE WEATHER STATION: Function Buttons PROGRAM MENU: TIME SET: The SET button moves through the program menu and the UP or DOWN button change the values. North American Time Zones are: x -4 Atlantic x EST Eastern x CST Central x MST Mountain x PST Pacific x -9 Alaska x -10 Hawaii Press and release the SET button to continue. Press and release the UP or DOWN button to select the 12-hour or 24-hour time. Press and release the SET button to continue. A/C Adapter access Battery compartment A/C power adapter: Plug the enclosed 6-volt a/c power adapter into the wall outlet, then into the back of the weather station. Batteries: x Remove the battery cover from the weather station: x Insert a finger in the rounded depression at the right side of the battery cover. x Install three fresh AAA alkaline batteries according to the polarity markings. If the indoor temperature is not shown in the LCD after 60 seconds, remove all adapter and wait for at least 60 seconds before powering up the weather station again. INSTALL BATTERIES IN THE TRANSMITTER: C/F Selection TX Button Channel Button x x x x x x x Remove the screws and the battery cover from the back of the transmitter with a small screwdriver. Insert two fresh AAA alkaline batteries into the transmitter, observing the correct polarity (see Battery Compartment Battery Cover 3 6 x x x x MONTH: The Month will flash. [. . . ] Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer. La Crosse Technology, Ltd will pay all expenses for labor and materials for all repairs covered by this warranty. If necessary repairs are not covered by this warranty, or if a product is examined which is not in need or repair, you will be charged for the repairs or examination. The owner must pay any shipping charges incurred in getting the La Crosse Technology, Ltd product to a La Crosse Technology, Ltd authorized service center. [. . . ]