User manual KYOSHO TF6 PARTS LIST

[. . . ] 10350 Nations Ford Road Suite A, Charlotte, NC 28273 Phone: 1-704-644-1650 Fax: 1-704-644-1662 Email: satosales@satoamerica. com SATO LABELING SOLUTIONS AMERICA, INC. 1140 Windham Parkway, Romeoville, Illinois 60446 Phone: 630-771-4200 Fax : 630-771-4210 Email: sales@satolabeling. com Horticultural Division 930 Jimmy Ann Drive Daytona Beach, FL 32117 Phone: 1-386-274-5566 Fax: 1-386-274-5599 Europe SATO INTERNATIONAL EUROPE N. V. (Regional HQ) Leuvensesteenweg 369, 1932 Sint-Stevens-Woluwe, Brussels, Belgium Phone: 32(0)-2-788-80-00 Fax: 32(0)-2-788-80-80 Email: info@be. sato-europe. com SATO LABELLING SOLUTIONS EUROPE GmbH Ersheimer Straße 71, 69434 Hirschhorn, Germany Phone: 49-6272-9201-324 Fax: 49-6272-9201-399 SATO FRANCE SAS Parc D'Activities - Rue Jacques Messager - 59175 Templemars, France Phone: 33-3-20-62-96-40 Fax: 33-3-20-62-96-55 Asia Pacific & Oceania SATO INTERNATIONAL ASIA PACIFIC PTE. (Regional HQ) 438A Alexandra Road #05-01/04, Alexandra Technopark, Singapore 119967 Phone : 65-6271-5300 Fax : 65-6273-6011 Email: sales@sato-int. com SATO ASIA PACIFIC PTE. [. . . ] 307 Haining Road, ACE Bldg, 10th Floor, Hongkou Area, Shanghai, China 200080 Phone: (86) 021- 63068899 Fax: (86) 021- 63091318 SATO NEW ZEALAND LTD 30 Apollo Drive, Mairangi Bay PO Box 305-031, North Shore, Auckland, New Zealand Phone: 64-9-477-2222 Fax: 64-9-477-2228 SATO AUTO-ID MALAYSIA SDN. No. 25, Jalan Pemberita U1/49, Temasya Industrial Park Section U1, 40150 Shah Alam, Selangor Darul Ehsan, Malaysia Phone: 60-3-7620-8901 Fax: 60-3-5569-4977 Email: sales@satosms. com. my SATO AUTO-ID (THAILAND) CO. , LTD. 292/1 Moo 1 Theparak Road, Tumbol Theparak, Amphur Muang, Samutprakarn 10270 Phone: 662-736-4460 Fax: 662-736-4461 SATO AUSTRALIA PTY LTD. 1/1 Nursery Avenue, Clayton Business Park (1508 Centre Road) Clayton VIC 3168, Melbourne, Australia Phone: 61-3-8814-5330 Fax: 61-3-8814-5335 SATO UK LTD Valley Road, Harwich, Essex England Co12 4RR, United Kingdom Phone: 44-1255-240000 Fax : 44-1255-240111 Email : enquiries@satouk. com SATO POLSKA SP Z O. O. Wroclawska 123, 55-015 Radwanice K/Wroclawia, Poland Phone: 48-71-381-03-60 Fax: 48-71-381-03-68 Email: info@sato-europe. com SATO IBERIA S. A. Can Roqueta, 08202 - Sabadell, Barcelona, Spain Phone: 34-93-492-5750 Fax : 34-93-786-3451 For a full list of all SATO offices, refer to www. satoworldwide. com Extensive contact information of worldwide SATO operations can be found on the Internet at www. satoworldwide. com Version: SI-GL4xxe-01rA-05-06-07-NICIG © Copyright 1994 ­ 2007 All rights reserved. No part of this document may be reproduced or issued to third parties in any form whatsoever without the express permission of SATO. The materials in this document are provided for general information and are subject to change without notice. SATO assumes no responsibilities for any errors that may appear. 4 LAN Card Installation Guide GL4exe LAN Card Installation Before installing the LAN card, make sure the printer is OFF and disconnected from the power supply. Use a Phillips head screwdriver to remove the two screws that secure the Cover Plate to the LAN Card slot. Make sure you have discharged any static electricity (by touching a grounded component on the printer) and plug the LAN card into the slot so that it snaps into place. Tells the 10/100Base-T NIC to perform an automatic detection scheme and configure itself to be one of the other allowable options. · 10 Half Duplex - communicates at 10 megabytes per second using half duplex. · 10 Full Duplex - communicates at 10 megabytes per second using full duplex. · 100 Half Duplex - communicates at 100 megabytes per second using half duplex. · 100 Full Duplex - communicates at 100 megabytes per second using full duplex. Determines how the printer and/or NIC card respond when a job has been completed. The NIC card responds to the host that the job is complete when the entire print job has been accepted by the printer. · Enhanced - the NIC card responds to the host that the job is complete when the entire job has not only been accepted by the printer, but also completely printed. · Off - without synchronization between the NIC and the printer. The NIC card is simply a pass-trough and the printer tells the host when the job is complete. Determines whether the printer processes incoming data when it is in an offline state. Offline Process Disable* Ethernet Speed Auto Select* Job Control Standard* · Disable - factory default. [. . . ] Determines whether the printer processes incoming data when it is in an offline state. Offline Process Disable* Ethernet Speed Auto Select* Job Control Standard* · Disable - factory default. · Enable - continues to process (but not print) the current network/parallel job while the printer is offline until in a buffer-near-full state. Is the menu selection screen for the Ethernet Address option of the INTERFACES mode. Its menu options are explained in the following five menu screen descriptions. ETHERNET ADDRESS IP Address Subnet Mask Gateway Address MAC Address DHCP This menu allows the IP Address to be set for the TCP/IP protocol in four three-digit segments (SEG1 through SEG4). [. . . ]