User manual KYOSHO SIRIO S09-R

[. . . ] This saves energy, but the printer requires time to warm up when it receives a print job. The system comes from the factory set for a 30-minute delay before entering the Power Save Mode. Type in your password (the default password is aaaaaa), then press Enter. Adjust the guides for paper size and load documents face up, with the top edge entering the scanner. [. . . ] Adjust the guides for paper size and load documents face up, with the top edge entering the scanner. For more information, check with your System Administrator or see the on-line User's Guide provided with your system. Requires a USB connection and a scanning/organizing software package such as PaperPort® which is supplied with your system) 4. Use the touch screen menu to enter the e-mail address and make any adjustments in settings. Using the touch screen, enter a file name and set any scanning options you require. Once the scan is complete, the unit beeps and displays a confirmation message. Before sending your document to a file server, profiles should be set up to speed the process. a profile contains a list of filing parameters such as your filing protocol , directory , file name . Use this feature to perform a pull scan controlled from a Windows PC connected to the MFP via USB. Use the touch screen menu to enter network information and alter the scan output to suit your needs. Use the LED cleaner provided with the toner cartridges or a soft, lint-free cloth to gently wipe each of the four LED heads. From time to time the Automatic Document Feeder (ADF) pad assembly and feed rollers may become dirty. Moisten a soft, clean, lint-free cloth and wipe the feed rollers (3) by moving the cloth from side to side. Rotate the rollers forward with your finger and repeat the previous step until the rollers are clean. Wipe the three back rollers (1) by moving the cloth from side to side. Turn the wheel (1) to rotate the two front rollers (2)as you wipe them, until they are clean. Clean the rollers by moving a soft cloth moistened with water from side to side. Moisten a soft, clean, lint-free cloth and gently wipe the white sheet on the under side of the document cover to remove dust or any toner particles. Moisten a soft, clean, lint-free cloth and gently wipe the document glass. Use a soft cloth or slightly moistened with water, a neutral detergent or ethanol to gently clean the touch screen. [. . . ] Moisten a soft, clean, lint-free cloth and gently wipe the white sheet on the under side of the document cover to remove dust or any toner particles. Moisten a soft, clean, lint-free cloth and gently wipe the document glass. Use a soft cloth or slightly moistened with water, a neutral detergent or ethanol to gently clean the touch screen. Never use solvents or strong detergents on the cabinet: they could cause damage. [. . . ]