User manual KYOSHO RC SURFER

[. . . ] Check with your local solid waste officials for details in your area for recycling options or proper disposal. B If using a radio you are in possession of, check the dimensions of its servos against the diagram below. B , « , If already supplied with the radio, there is no need to purchase a battery box separately. [. . . ] B Do not put your hands or any objects into rotating parts, as this could result in serious accidents!Notify the lifeguard of your presence, and follow his/her instructions. , µ , « , ê , « When rivers are swollen or their current is strong!B , ª , « Also make sure that nobody is using the same frequency as you do at the same time!B Never put the charger and Ni-Cd battery near flam-mable material while charging as this may cause fires!B OE¯ Under the following circumstances, short circuits may oc- ur and result in fires or other accidents: c · B Never dispose of Ni-Cd batteries into a fire, as these can explode or emit noxious gases from heavy met- ls a used in Ni-Cd batteries !When NOT using the model, always switch off the receiver and transmitter!Does the speed controller operate according to your inputs on the transmitter?Is nobody on your frequency when running at the same time in the same area?B Make sure the rudder operates according to your inputs on the transmitter. B Make sure the speed controller operates according to your inputs on the transmitter. B , â ' Avoid getting sand or water onto board interior whilst changing batterys. When NOT using the model, always switch off the receiver and transmitter! furthermore , disconnect the Ni-Cd battery and remove it from the model! [. . . ] B < Make sure screws and nuts are securely tightened and other parts are not worn. Repair the wiring should cords be damaged or drag into rotating parts. Should servo cords and the receiver antenna be damaged, return them to the manufacturer for repair. [. . . ]