User manual KYOSHO PURETEN EP AIPHA 2 4WD SUBARU IMPREZA WRC

[. . . ] Before commencing assembly, please read these instructions thoroughly. Oe First-time builders should seek the advice of experienced modellers before commencing assembly and if they do not fully understand any part of the construction. [. . . ] How to read the instruction manual: A: Indicates the number of the assembly step C: All parts, except screws, are identified by key Numbers. When purchasing spare parts, identify the key number of the part required and cross reference this to the Spare Parts page, which shows the purchasable spare parts and the key numbers contained within. B , Ä To more easy fit 42 to 40, carefully prise 43 apart with a screwdriver. B , ð 'è Tighten the screws with one sheet of paper inserted between both gears. B Before painting, use a neutral detergent to remove any oil residues and dirt. [ "à Paint the body shell from the inside using Kyosho spray colors. T For safety reasons, always mount dust cover and body shell when running the car !Do not run your car on ground: · WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents!Radio reception will be reduced if weak batteries are used, You may lose control of your car when running this way and this could lead to accidents. Keep in mind that people around you may also operate a radio control model! [. . . ] Furthermore, disconnect the Ni-Cd battery and remove it from the model !Bateria NiCd descargada Electronic speed controller is not properly adjusted. [. . . ]