User manual KYOSHO NISSAN GT-R PARTS LIST

[. . . ] check Address Reply to Set what appears under "From" on the email. Set the address or addresses to which the email will be sent Set what appears under "Subject" in the email. , date and time for faxes) has already been programmed into the system. If prompted [Enter PIN], key in your PIN number and press the Enter key ( ). [. . . ] If prompted [Enter PIN], key in your PIN number and press the Enter key ( ). Make your settings* on the display using the Up, Down, Left and Right Arrow keys and the Enter key. Note This option is only available if USB Memory is plugged into the USB port (1) on the front of the machine. *USB Memory Settings See the on-line User's Guide on the CD supplied with your system or check with your system administrator for more information. If no file name is entered and you have not specified your own Default File Name, the file name used is "Image. " Note: When scanning multiple documents from the ADF , the image file is divided by page and saved. The file name is "file name-###, " (### = number between 000 and 999 automatically allocated to each page). Make your settings* on the display using the Up, Down, Left and Right Arrow keys and the Enter key. Scan the document and send the scanned image to a PC which is on the network with your system. The PC and its IP address must be programmed into the MFP system by your system administrator. Lower the printer cover to protect the image drums from light, but do not latch it. Note For letterhead paper, load face down with top edge towards the front of the printer. 5" x 14" [216 x 356 mm] (Non-standard sizes must be defined in driver before printing; check with your system administrator. Load envelopes face up, top edge to the left and short edge facing into the printer. Provides straight-through, curl-free print path (required for envelopes, labels and heavy paper). Sheets exit face up (for multi-page documents, select reverse order printing in your application Print dialog box). Changes for an individual task you are performing can be made on-the-fly as you set up the task. It is best to let your system administrator make changes in the printer menu defaults. Always consult the system administrator before attempting to make changes in the menu. Press the Up Arrow and Down Arrow keys repeatedly to scroll through the menu entries. [. . . ] Always consult the system administrator before attempting to make changes in the menu. Press the Up Arrow and Down Arrow keys repeatedly to scroll through the menu entries. Press the Enter key to select an entry to change, or to engage a new setting. Press the Left Arrow key to go back up a level in the menu · Consult the dealer where you purchased your system. [. . . ]