User manual KYOSHO NISSAN FAIRLADY Z NISMO S-TUNE

[. . . ] 4 Paper level indicator Indicates the level of the remaining paper in the 550-sheet paper tray. 8 Extension output tray Pull this tray out to print on paper larger than Letter. Place the machine on a level and sturdy surface that can withstand the machine weight, 22. Ensure that the printer is installed with a minimum clearance of 255mm (10in) from the rear vent to any wall, 200mm (8in) from the left vent to any wall, and 300mm (12in) from the right vent to any wall. [. . . ] â· Do not subject the drum-toner cartridge to direct sunlight or strong light. When installing the drum-toner cartridge, select a location not subject to strong light and try to finish the installation within 5 minutes. Do not let the drum-toner cartridge stand upside down or place it upside down as this may damage the drum. Although the toner is not harmful to the body, wash it off immediately with cold water if your hands or clothes are in contact with it. It is recommended to use up the drum-toner cartridge within one year of removing it from its packaging. Insert the right and left tabs of the face up (rear) tray into the holes at the back of the printer (1), and lower the tray into position (2). Push up the rear output tray lever as shown in the diagram (1) and pull out the extension tray (2). Hold the drum-toner cartridge by the grip and insert it into the slot inside the printer. NOTE When the optional offset catch tray is installed, fold the tray first before opening the cover. NOTE If the offset catch tray is folded as in Step 1, close the cover and then return the tray to its original position. Take the drum-toner cartridge out of the packaging box and shake it seven or eight times as shown in the diagram. Level downwards) or < > button (moves one level upwards) To check whether the printer is correctly installed, use the control panel to print the [System Settings List]. NOTE If you have made a mistake when operating the control panel, press the <MENU> button to restart. Press the < > or < > button until [Report/List] is displayed, then press the < > button. Press the < > or < > button until [System Settings] is displayed, then press the < > button. > [Rear Output Tray] is displayed in the column for Output Device even when the rear tray is not installed. When the face up (rear) tray is installed, lower the face up (rear) tray output lever. Switch between < > button (displays the menus or items in the previous menu or item) or same level < > button (displays the next menu or item) Move the cursor (_) < > button (moves to the of the setting value to right) or < > button the right or left (moves to the left) Confirm setting <FEED/SELECT> button When you press the MENU button on the control panel, you enter the printer's menu system. At that point, the first line of the display contains the text [Menu], indicating that you are in the menu system. The second line of the display lists the active menu, which you can change by pressing the < > or < > button. Using these buttons repeatedly, you can cycle through the main menus in the following order: Print Language; Report/List; Meter Reading; Admin Menu; Display Language. By using the arrow buttons as indicated above, you can navigate through the menu system to make any required settings. [. . . ] The IP address can be found on the Configuration Sheet Test the Printer Driver Installation To make sure the printer driver is correctly installed, print a page from any program. Using a Web Browser (Optional) Use your web browser to configure print server and printer menu settings on an embedded web page. Using Online Help For details regarding the items that can be set in each screen, click the [Help] button to display the Online Help. After completing the installation procedure, verify that the printer is working correctly by printing a document from an application. [. . . ]