User manual KYOSHO MITSUBISHI LANCER EVOLUTION X PARTS LIST

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. www. okiprintingsolutions. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] As the example of (2) shows, insert "_" between the printer name and output parameters. > If PS%n or PLT%nH is specified for the printer name as in the example of (3), however, the printer does not operate normally with an output style different from the preset one. > Set a printer name corresponding to the print language/ mode and output style. Refer to: · Manuals, such as online manuals, that came with various workstations. · For details about the -C option: see "-C Option (lpr Command)" on page 36. NOTE MITSUBISHI LANCER EVOLUTION X Network Guide> 30 PRINTING (SOLARIS) This section describes the procedure for printing from workstations running or Solaris. Refer to: Manuals that came with the workstations. PRINT (LP) The "lp" command is used for printing. of copies] File name Command Options The following command options are available: -d Printer name Specify the printer name registered by the "lpadmin" command as the -d option. If one "lp" command is issued to print multiple files, the number of copies specified by this option will apply to all the files. However, this option is effective when the printer is in the spool mode. In the non-spool mode, the client must be a Windows NT machine to use this option. -m option), those not processed by the workstation which sends the print instructions will not be effective. > The system default is used if no tray number is specified, a specified tray is not loaded, or paper of a specified size is not loaded. Paper is selected but the document size is not corrected according to the paper size. > If the print data specifies a paper tray, the tray specification by the data becomes valid and that by the -C option becomes invalid. > If an unacceptable combination is specified, the printer may not operate correctly. Selecting a Paper Output Tray The following parameters can be specified: PARAMETER OUTUP/outup OUTDOWN/outdown NOTE DESCRIPTION Ejects prints to the rear tray (option). Ejects prints to the center tray. Selecting a Paper Type The following parameters can be specified: PARAMETER PTS/pts PT1/pt1 PT2/pt2 POH/poh PRC/prc DESCRIPTION Selects Plain paper. Selects Recycled paper. MITSUBISHI LANCER EVOLUTION X Network Guide> 37 Specifying 2 sided Printing The following parameters can be specified: PARAMETER DUP/dup DESCRIPTION 2 sided printing as follows: TUMBLE/tumble 2 sided printing as follows: SIMP/simp 1 sided printing > If several parameters are specified in one "lpr" command, data may not be printed correctly. > If the print data specifies 2 sided or 1 sided printing, the specification by the data becomes valid and overrides that by -C option. NOTE MITSUBISHI LANCER EVOLUTION X Network Guide> 38 Specifying Paper Size and 2 sided Printing Select a paper size and a binding type. The following parameters can be specified: PARAMETER A4D/a4d A4T/a4t A5D/a5d A5T/a5t B5D/b5d B5T/b5t DESCRIPTION 2 sided printing on A4 paper and long-side binding 2 sided printing on A4 paper and short-side binding 2 sided printing on A5 paper and long-side binding 2 sided printing on A5 paper and short-side binding 2 sided printing on 85 paper and long-side binding 2 sided printing on B5 paper and short-side binding > If several parameters are specified in one "lpr" command, data may not be printed correctly. > If the print data specifies 2 sided or 1 sided printing, the specification by the data becomes valid and overrides that by -C option. Specifying Collation The following parameter can be specified: PARAMETER COLLATE/collate NOTE DESCRIPTION Sorts prints electronically. > For some print language, the specification may be invalid. NOTE MITSUBISHI LANCER EVOLUTION X Network Guide> 39 Specifying Color and Print Modes The following color and print mode parameters can be specified: PARAMETER CC/cc CB/cb GC/gc GB/gb AC/ac AB/ab DESCRIPTION Selects color for color mode and quality priority for print mode. [. . . ] Check the print language set up for the printer and that for the printer driver for Macintosh. If the print language of the printer and that of the printer driver are different, set the same language for them. After the Macintosh was connected to the printer, the power to the printer was shut off. If "Please reboot printer" still appears on the printer control panel, contact service. Verification 2 Action 2 Cause 3 Verification 3 Action 3 "Please reboot printer" is displayed on the printer control panel. [. . . ]