User manual KYOSHO MINIUM CESSNA 210 CENTURION

[. . . ] Cables not included in the package contents can be purchased separately. y y Remote Control & Batteries (AAA x 2) Warranty Card / Safety Guide (Not available in some locations) y y Power Cord Owner's Instructions Viewing the Control Panel The product colour and shape may vary depending on the model. Control Panel Remote control sensor Power Indicator SOURCEE MENU Y z P (Power) Aim the remote control towards this spot on the TV. Blinks and turns off when the power is on and lights up in standby mode. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. Displays an on-screen menu, the OSD (on screen display) of your TV's features. [. . . ] Use Mode: Selecting Store Demo or Home Use Press the or button, then press the ENTERE button. Store Demo mode is for retail environments. Analogue. For more information, refer to Channel Auto Tuning. Press the ENTERE button at any time to interrupt the memorisation process. When pressing TV controller, the function menu screen Store Demo is only for shop display. Clock: Setting the Clock Mode Set the Clock Mode automatically or manually. (Australia only) Manual: Allows you to manually set the current date and time. appears. Select the Menu(m) and press it more than 5 seconds using the controller. Cancel the Store Demo by selecting Source( ) and pressing it more than 5 seconds. Setup Complete Press the ENTERE button. (Australia and New Zealand) 1 Connect Samsung Wireless Lan Adaptor. Select the Next button, then press the ENTERE button. The completed settings are displayed. If You Want to Reset This Feature. . . Select System - Setup (Initial Setup). You should do Setup (MENU System) again at home although you did in shop. If you select the Skip button, you have to set network in 2 Complete the network settings in accordance with your desired way. the Network Settings respectively. For more information, refer to "Connecting to the Network" in the e-Manual. If you forget the PIN code, press the remote control 3. Press or button to select the category you want. Basic Features Changing the Preset Picture Mode Adjusting Picture Settings Changing the Picture Options Changing the Preset Sound Mode Adjusting Sound Settings Currently displayed video, TV Programme, etc. Displays the sub-menu list. Press ENTERE button to select the submenu you want. } Index E Enter e Exit Operation Buttons } Index: Displays the index screen. <Viewing the Contents> a Try now: Displays the OSD menu that corresponds to the topic. You can scroll through the magnified screen by using the or buttons. To return to the screen to normal size, press the RETURN button. How to toggle between an e-Manual topic and the corresponding OSD menu(s). This function is not enabled in some menus. Method 1 1. If you want to use the menu that corresponds to an e-Manual topic, press the red button to select Try now. For added stability, install the anti-fall device for safety purposes, as follows. Wall Mount Kit Specifications (VESA) Case A. Installing the KYOSHO Wall-Mount 1 1 To avoid the TV from falling Case B. Confirm that the screws have been firmly installed onto the wall. You may need additional material such as an anchor depending on the type of wall. Since the necessary clamps, screws, and string are not supplied, please purchase these additionally. 1 1 2. Remove the screws from the centre back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again. Wall mount kit is not supplied but sold separately. Install your wall mount on a solid wall perpendicular to the floor. [. . . ] · Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns on, refer to "Remote control does not work" below. Storage and Maintenance Issues There is no picture/video. If you remove the attached sticker on the TV screen, The exterior and screen of the product can get clean the residues and then watch TV. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent scratches. · Check cable connections (remove and reconnect all cables connected to the TV and external devices). · Set your external device's (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. [. . . ]