User manual KYOSHO LAZER ZX-5 FS

[. . . ] Oe For more information on the radio con-rol t set, refer to its instruction manual. B , µ Thi s car i s desi gned f or saddi e pack bat t er i es, not st r ai ght pack bat t er y. [. . . ] B Read through the manual before you begin, so you will have an overall idea of what to do. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. How to read the instruction manual: Please note them during the entire assembly. Of the part needed in the spare part list and refer to the left column to look up the corresponding order no. Before using them, check the screws on the true-to-scale diagrams on the left side in each assembly step. B , Self-tapping (TP) screws cut threads into the parts when being tightened. You may lose control of your model when operating it under such condition. B , ð Keep in mind that people around you may also operate a radio control model!B , K , Ì OE¯ , Ì , ð WARNING: in order to avoid accidents and personal injury, be sure to observe the following: Do NOT put fingers or any objects inside rotating and moving parts! Before charging, please carefully read the explanations of the Ni-Cd battery and charger unit!NEVER charge on top of or near easily inflammable material as this will result in fires!B Make sure the speed (electric speed controller) changes according to your transmitter inputs. [. . . ] B Make sure the speed (electric speed controller) changes according to your transmitter inputs. When NOT using the model, always switch off the receiver and transmitter! [. . . ]