User manual KYOSHO INFERNO US SPORTS 2 PARTS LIST

[. . . ] Make sure the printing unit and the support bracket are aligned and the unit is firmly in place. NOTE! Do not remove the orange paper band extending from inside the printing unit at this time. This band provides instructions for preparing the fusing unit. Install the Support Bracket 2. Place the support bracket (1) at the back of the printing unit. Setting up the Scanning Unit 1. Attach the paper support to the paper feed tray. 1 WARNING! The support bracket prevents the unit from tipping over when in use. [. . . ] Complete the connection only after installing the driver. Connect the Ethernet Cable Connect one end of your Ethernet LAN cable to an available port of your Ethernet hub. Connect the other end to the LAN port at the back of the scan unit. Connect the Scanning Unit Power Adapter 1. To mount the power adapter box to the back of the scanning unit, position the clip on the back of the box on the scanning unit frame as shown, then slide the box to the left until it locks in place. Connect the Printing Unit Cable 1. Connect one end of the USB cable (short cable) to the printing unit. 2. Connect the other end to the Copy port of the scanning unit. 7 Connect the Power connector cord 1. Connect the power connector cord to the power adapter on the scanning unit. 2. Be sure the printing unit power switch is in the "0" position. Connect the AC power cord to a power outlet. IMPORTANT NOTE! Do not turn power on scanning unit or printing unit! 8 Preparing the Image Drum/ Toner Cartridges 1. Carefully place the toner/drum cartridge back into the printing unit. 2. Carefully lift the black toner/drum cartridge out of the printing unit. 6. Push the blue lock lever towards the back of the unit as far as it will go. Then you will be prompted to continue installation of the Productivity Software. The Productivity Software supports all network MFP operations and includes: Note: Move the cursor over each main choice button to see a list of the software tools included. Select each driver and utility you want to install and follow the on-screen instructions. When the installation is finished, connect the USB cable to your computer. 14 Configuring Your MFP This section is specifically for persons who are responsible for the administration of this MFP. · From the KYOSHO MFP Network Setup Tool · From the MFP's web page · From the control panel . Configuring from the KYOSHO Management Utility (KYOSHO MFP Network Setup Tool) This tool provides a convenient way to remotely configure all KYOSHO MFP on the network. Click Start > Setting > KYOSHO MFP Network Setup Tool > KYOSHO MFP Network Setup Tool. Use the KYOSHO Management Utility (KYOSHO MFP Network Setup Tool) to define parameters for TCP/ IP, SMTP and POP3 protocols. It creates an KYOSHO print port and installs a pop-up utility to monitor printing unit status. PrintSuperVision Utility PSV. Net uses internet based software components to access and distribute data to support administrator control of all MFPs and printers on a network. Network Printer Status Utility This utility creates an additional tab called STATUS in the properties dialog that allows the client to monitor the selected MFP's status. Address Book An Address Book is a list of e-mail addresses to which you can send your scanned image. To create an address book, either enter the machines's web page or install and start the Network Setup Tool in the supplied CD-ROM. [. . . ] Adjust the paper guides to center the document(s) in the ADF. Placing document(s) on the glass 1. Place your document(s) with the text FACE DOWN on the glass and align the document(s) in the upper-left corner. For more information, see the on-line User's Guide on the Documentation CD provided with your printer. 3. Close the document cover. 17 Quick Operation Enter your copy count via the numeric keypad. Press Copy Mode key. Press B&W copy. to make Press color copy. [. . . ]