User manual KYOSHO INFERNO MP777 SPECIAL 2

[. . . ] When OSD is not on the screen, press the button to adjust volume. SEL Introduction Moves from one menu item to another vertically or adjusts selected menu values. Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor Automatically detects the surrounding brightness it accordingly. Power indicator Shows PowerSaver mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. Remote Control Sensor Aim the remote control towards this spot on the LCD Display. Rear Note For detailed information concerning cable connections, refer to Connecting Cables under Setup. The LCD Display 's configuration at the back may vary slightly depending on the model. POWER S/W ON [ ] / OFF [O] Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. Introduction RGB IN Connect the RGB IN terminal at the back of your product to your computer. VIDEO OUT Connect between the [VIDEO OUT] port on the product and the D-Sub port on your monitor using a D-Sub cable. HDMI IN Connect the HDMI terminal at the back of your LCD Display to the HDMI terminal of your digital output device using a HDMI cable. Connect your headphones to the Headphone connection terminal. LAN LAN Connection Terminal Keyboard / Mouse, Mass Storage Device Compatible. AUDIO IN Connect the audio cable for your product to the audio port on the back of your computer. RS232C IN MDC(Multiple Display Control) Program Port Introduction Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. [. . . ] Fix the Kensington Lock to a desk or a heavy stationary object. Note See Connecting Cables for further information regarding cable connections. Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequency. Introduction POWER OFF Number Buttons DEL + VOL SOURCE D. MENU TOOLS Up-Down Left-Right buttons INFO COLOR BUTTONS TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo 1. Used to enter the password during the OSD adjustment or to use MagicInfo. Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time. D. MENU DTV menu display - This function does not work for this LCD Display. DEL ton / GUIDE but- Introduction - This function does not work for this LCD Display. INFO Moves from one menu item to another horizontally, vertically or adjusts selected menu values. Current picture information is displayed on the upper left corner of the screen. Press to add or delete channels and to store channels to the favorite channel list in the "Channel List" menu. TTX/MIX TV channels provide written information services via teletext. MTS/DUAL - This function does not work for this LCD Display. MTSYou can select MTS (Multichannel Television Stereo) mode. Audio Type FM Stereo Mono Stereo SAP MTS/S_Mode Mono Mono Stereo Mono SAP Default Manual Change Mono DUALSTEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV. If you have problems in installing the Adaptor (video) driver, boot the computer in Safe Mode, remove the Display Adaptor in the "Control Panel -> System -> Device Administrator" and then reboot the computer to reinstall the Adaptor (video) driver. Check List Note · The following table lists possible problems and their solutions. Before calling for assistance, check the information in this section to see if you can remedy any problems for yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. For more network-related information, refer to the MagicInfo Troubleshooting section. · Problems related to the Installation (PC Mode) Note Problems related to the LCD Display installation and their solutions are listed. Q: The LCD Display screen flickers. Troubleshooting A: Check if the signal cable between the computer and the LCD Display is securely connected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Ensure that the power cord is firmly connected and the LCD Display is on. (Refer to the Connecting a Computer) Q: A: "Check Signal Cable" message. Ensure that the signal cable is firmly connected to the PC or video sources. (Refer to the Connecting a Computer) A: Q: A: A: Q: A: Ensure that the PC or video sources are turned on. (Refer to Connecting a Computer) Q: A: A: A: Q: A: The image is not clear; picture is blurred. [. . . ] Check if the resolution and frequency set for the computer video card falls in the range supported by the LCD Display. Q: The remote control buttons do not respond. Troubleshooting A: A: A: A: A: Check the polarities (+/-) of the batteries. Check if a special fluorescent or neon lamp is on in the vicinity. Q&A Q: A: How can I change the frequency?Note That video card support can vary, depending on the version of the driver used. [. . . ]