User manual KYOSHO INFERNO MP7.5 YUICHI KANAI EDITION 2

[. . . ] Oe For more information on the radio con-rol t set, refer to its instruction manual. 21 class engine, which is made crank shaft and pilot shaft as one part (SG shaft only). [. . . ] T , ð After putting the cover on, loosen the screw, fit in the plastic washer and screw in the screw again. B , , ð , é Then, gently move the piston up and down to get rid of air bubbles. B , µ , É , µ Apply instant glue little by little in the order. B , É Trim the shaded portion away so the exhaust pipe can exit. Before painting, use a neutral detergent to remove any oil residues and dirt. B "à Paint the body shell from the inside using KyoshoÕs spray colors. B Zæ , µ Slightly bend the body pins as shown in the diagram for easier removal. Adjust the front toe either by making the tie rods longer or by making them shorter. Adjust the front / rear camber either by making the upper rods longer or by making them shorter. Ensure that the length of both the left and right tie rods is the same. [. . . ] Right after use, do NOT touch equipment on the model such as the engine and muffler, because they generate high temperatures!B Parts indentified only by key numbers are not sold individually· B Some of the parts included are not available as spare parts. [. . . ]