User manual KYOSHO INFERNO MP-7.5 YUICHI KANAI EDITION 2 EXPLODED VIEW

[. . . ] Note: For more detailed information, see the on-line User's Guide or check with your System Administrator. Reset Key Press and hold for 5 seconds to change the scanner to the factory default settings. Power Save Key Press once to go to "sleep" mode (continuous press is invalid). Note: For more detailed information, see the on-line User's Guide or check with your System Administrator. [. . . ] Enter the e-mail address in the "To" field in one of these ways. Press the ADDRESS BOOK key and use the arrow keys to navigate to the address. Note Check with your System Administrator or see the on-line User's Guide on the CD supplied with your system for more information. Use the numeric keypad to type in the number, or · press the appropriate pre-programmed One Touch key , or · Search the phone book by pressing the Address Book key ­ once for speed dial entries or ­ twice for group dial entries. Optional: Press the Additional Settings key and use the arrow and OK keys to make additional fax mode settings*. The system will scan and store your document ready for sending at the specified time. Enter the destination fax number (see "Enter the destination fax number:" on page 14). Use the arrow keys and numeric keypad to set the date and time the fax is to be sent. If you need to send multiple sets of documents from the ADF or glass, enable the "Manual Feed" option: 1. Enter the destination fax number (see "Enter the destination fax number:" on page 14). Enter additional phone numbers (up to 100), pressing the OK key after each number is entered. Make sure the lever is pulled all the way forward before attempting to remove the toner cartridge!Pull the colored lever on the right side of the toner cartridge towards the front of the printer to close the cartridge. Unpack the new toner cartridge and shake it back and forth to distribute the toner. Use the lens cleaner supplied with the toner cartridge (or a clean soft cloth) to gently clean the LED head. If documents are not feeding smoothly through the ADF, please follow these cleaning procedures. Moisten a soft, lint-free cloth with isopropyl alcohol (common rubbing alcohol). Clean the pad by moving the moistened cloth up and down along the pad (1). Clean the feed rollers by moving the moistened cloth from side to side while rotating the rollers. To ensure optimum image quality and performance, clean the glass occasionally to remove dust or any toner particles. Gently wipe the document glass (1) and the white sheet beneath the document cover (2). After scanning approximately 100, 000 pages through the ADF, the pad module can become worn out and can cause feeding problems. [. . . ] MAILBOX UNAVAILABLE CHECK "TO" ADDRESS The requested mail action not taken because the "TO" address was not found. EEE = 492: Tray 2 (option) LOAD SSS/TTT AND PRESS EEE:YYYMEDIA MISMATCH The media size (SSS) and/or type (TTT) in the tray does not match the print data. If you continue to have problems, check with your System Administrator. FTP PASSWORD ERROR CHECK PASSWORD IN FOLDER Check your password and try again. [. . . ]