User manual KYOSHO INFERNO MP-7.5 YUICHI KANAI EDITION

[. . . ] Oe Always keep this instruction manual ready at hand for quick · Oe Because there are stick-type and wheeltype transmitters, use which ever fits your convenience best. Oe For more information on the radio con-rol t set, refer to its instruction manual. [. . . ] B , Å Adjust with this screw the carburetor so it cannot close more than 1mm. T , ð After putting the cover on, loosen the screw, fit in the plastic washer and screw in the screw again. B , , ð , é Then, gently move the piston up and down to get rid of air bubbles. B , µ , É , µ Apply instant glue little by little in the order. B , É Trim the shaded portion away so the exhaust pipe can exit. Before painting, use a neutral detergent to remove any oil residues and dirt. B "à Paint the body shell from the inside using KyoshoÕs spray colors. B Zæ , µ Slightly bend the body pins as shown in the diagram for easier removal. Adjust the front toe either by making the tie rods longer or by making them shorter. Adjust the front / rear camber either by making the upper rods longer or by making them shorter. [. . . ] Store fuel ONLY in cool, dry and dark places out of children's reach! Right after use, do NOT touch equipment on the model such as the engine and muffler, because they generate high temperatures! [. . . ]