User manual KYOSHO GP ULTIMA RB SPORTS PARTS LIST

[. . . ] Use the printer control panel to set the printer defaults (media size/ weight/ type for each tray, feed tray, etc. ) and to print out reports, including the MenuMap which provides a list of all printer menu items and the current settings for each. For more information on the printer menu items, see "Contents of Each Printer Menu" in the on-line User's Guide or check with your System Administrator. (60 to 120 g/m2) Adjust the guides (1) for paper size and load documents face up, with the top edge entering the scanner. [. . . ] Note Check with your System Administrator or see the on-line User's Guide on the CD supplied with your system for more information. Broadcast Faxing (see page 17) ) key to go back to RETURN ( the main fax screen. Use the numeric keypad to type in the number, or · press the appropriate pre-programmed One Touch key , or · Search the phone book by pressing the ADDRESS BOOK key ­ once for speed dial entries or ­ twice for group dial entries. Optional: Press the Additional Settings key and use the arrow and OK keys to make additional fax mode settings*. Off, On Off, On Off, On Change the setting to On to avoid transmission problems when faxing overseas. The system will scan and store your document ready for sending at the specified time. Enter the destination fax number (see "Enter the destination fax number:" on page 15). Use the arrow keys and numeric keypad to set the date and time the fax is to be sent. If you need to send multiple sets of documents from the ADF or glass, enable the "Manual Feed" option: 1. Enter the destination fax number (see "Enter the destination fax number:" on page 15). Polling is a process in which documents are loaded into your system, and the system is then set to wait for a call from a remote location before faxing. Make sure the lever is pulled all the way forward before attempting to remove the toner cartridge!Pull the colored lever on the right side of the toner cartridge towards the front of the printer to close the cartridge. Unpack the new toner cartridge and shake it back and forth to distribute the toner. Use the lens cleaner supplied with the toner cartridge (or a clean soft cloth) to gently clean the LED head. If documents are not feeding smoothly through the ADF, please follow these cleaning procedures. Moisten a soft, lint-free cloth with isopropyl alcohol (common rubbing alcohol). Clean the pad by moving the moistened cloth up and down along the pad (1). Clean the feed rollers by moving the moistened cloth from side to side while rotating the rollers. To ensure optimum image quality and performance, clean the glass occasionally to remove dust or any toner particles. Gently wipe the document glass (1) and the white sheet beneath the document cover (2). After scanning approximately 100, 000 pages through the ADF, the pad module can become worn out and can cause feeding problems. [. . . ] Close the printer cover and gently lower the scanner unit back into place. EEE = 353: Black Drum Open and close the cover to clear the message and continue printing. The requested mail action not taken because the "TO" address was not found. The media size (SSS) and/or type (TTT) in the tray does not match the print data. [. . . ]