User manual KYOSHO GIGA CRUSHER DF

[. . . ] B Read through the manual before you begin, so you will have an overall idea of what to do. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. How to read the instruction manual: Please note them during the entire assembly. [. . . ] Check Standard Position Settings Confirm settings are as per the two page instruction sheet on Engine Adjustment Settings prior to first run. As the engine adjustment settings are set correctly at the time of shipment, use these settings when starting the engine. To choke the engine, cover the muffler's exhaust hole with your finger and pull the starter cord. Check that fuel travels down the silicone tube and into the carburetor. If fuel hasn't reached the carburetor, the engine will not start. Also, if too much fuel enters the carburetor, starting may become difficult. B * Before starting the engine, check the condition of the transmitter and receiver batteries. *Before starting the engine, check the brake is working and responding properly to transmitter inputs. 1 Start right engine, and once the engine is stable when idling, stop the engine. * If using a 3-channel radio system, move the third servo (reverse) to choose reverse or forward. Then, move the throttle control to start moving the model in that direction. * When using the 3-channel system with reversing servo, only operate it in the following conditions. * By moving the throttle control and accelerating, the 3-speed transmission changes gear which also changes the sound of the engine. to adjust the timing of gear changes , refer to page 36 on adjustment of gear shift timing. [. . . ] When the dry batteries get weaker, transmission and reception of the radio decrease. You may lose control of your model when operating it under such condition. B , ð Keep in mind that people around you may also operate a radio control model! [. . . ]