User manual KYOSHO FW05R CONVERSION KIT PARTS LIST

[. . . ] Mention of software products manufactured by other companies does not necessarily constitute endorsement by the manufacturer . While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the web site: http://www. okiprintingsolutions. com Trademark Information Oki and Microline are registered trademarks of Oki Electric Industry Company Ltd. Apple, Macintosh and Mac OS are registered trademarks of Apple Computers Inc. [. . . ] If the TCP/IP Protocol is not listed, click the Add button. Network User's Guide for C3400n and C3530 MFP Windows - 15 5. 6. In the "Select Network Protocol" dialog box, select "TCP/IP Protocol" and click OK. In the "Local Area Connection Status" dialog box, click the Properties button. If the TCP/IP protocol is not listed, in the "Local Area Connection Properties" dialog box, click the Install button. In the "Select Network Component Type" dialog box, select Protocol and click the Add button. In the "Select Network Protocol" dialog box, select TCP/IP Protocol and click the OK button. Click the Close button in the "Local Area Connection Properties" dialog box. Click the Close button in the "Local Area Connection Status" dialog box. WINDOWS XP 1. Double-click the Local Area Connection icon and click Properties in the "Location Area Connection Status" dialog box. In the "Select Network Component Type" dialog box, select Protocol then click the Add. . . In the "Select Network Protocol" dialog box, select Internet Protocol (TCP/IP). Restart your computer to ensure that the utility has been fully removed. CONFIGURING WINDOWS TO PRINT TO THE NETWORK PRINTER Once you have configured the Network Card Setup utility you must configure Windows to print to the network printer. WINDOWS 98/ME When printing using TCP/IP the Oki LPR utility use the following procedure: 1. When installing the driver, ensure it is installed as a local printer and not a network printer. Install the Oki LPR utility as described on page 20 of this manual and add the printer installed earlier. WINDOWS NT 4. 0 NOTE: NT 4. 0 requires administrator privileges. With Windows NT 4. 0, you have two options for printing using TCP/IP. They are: > Oki LPR > Microsoft LPR In order to use Microsoft LPR, it must first be installed into your operating system. Under "Name or address of server providing lpd" type the host name or IP address of the host for the printer you are adding. Network User's Guide for C3400n and C3530 MFP Windows - 20 6. 7. Under "Name of printer or print queue on that server" type the logical printer name `lp' and then click OK. Follow the instructions on the screen to finish installing the LPRcompatible printer. If the LPR port is not available, install the Microsoft TCP/IP Printing Service. In the "Network" dialog box, click the "Services" tab. If "Microsoft TCP/IP Printing" is not listed, click the Add button. In the "Select Network Service" dialog box, select "Microsoft TCP/IP Printing" and click OK. Follow the remaining dialog box prompts. WINDOWS 2000 NOTE: Windows 2000 requires administrator privileges. With Windows 2000, there are four options for printing using TCP/IP. [. . . ] 7. CHANGING THE PASSWORD Complete the following steps to change the password for updating printer settings: 1. In the "Network Card Setup" pane, click to select the printer. The "Change Password" dialog is displayed. 3. Enter the new password as requested and click Save. The new password is saved and the printer automatically restarts. NOTE: If your printer stops at any time, you can restart it by selecting Printer -> Restart Printer in the "Network Card Setup pane". Network User's Guide for C3400n and C3530 MFP Macintosh - 30 ENABLE/DISABLE THE PRINTER WEB PAGE To enable/disable access to the Printer Web Page: 1. [. . . ]