User manual KYOSHO EDGE 540 VE29 SPARE PARTS

[. . . ] At the end of its useful life, under various national / state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials for details in your area for recycling options or proper disposal. 2ch with electronic speed controller and 1 servo radio control set CAUTION: Only use a surface radio with 2 channels and electronic speed controller! [. . . ] 2ch with electronic speed controller and 1 servo radio control set CAUTION: Only use a surface radio with 2 channels and electronic speed controller!This kit requires a 2 channel radio con-trol set with electronic speed controller. Because there are stick-type and wheel-type transmitters, use whichever fits your convenience best. For more information on the radio control set, refer to its instruction manual. For safe masking jobs, use this plastic masking sheet featuring one self-adhesive edge. Read through the manual before you begin, so you will have an overall idea of what to do. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. OPERATING YOUR MODEL SAFELY WARNING: Do NOT operate the model in the following places and situations: (Non-observance may lead to accidents! When the dry batteries get weaker, transmission and reception of the radio decrease. You may lose control of your model when operating it under such condition. Keep in mind that people around you may also operate a radio control model! WARNING: in order to avoid accidents and personal injury, be sure to observe the following: Do NOT put fingers or any objects inside rotating and moving parts! Before charging, please carefully read the explanations of the battery and charger unit!NEVER charge on top of or near easily inflammable material as this will result in fires! [. . . ] Before charging, please carefully read the explanations of the battery and charger unit!NEVER charge on top of or near easily inflammable material as this will result in fires!Make sure the speed (electric speed controller) changes according to your transmitter inputs. [. . . ]