User manual KYOSHO CLIPPED WING CUB M24

[. . . ] @ You are responsible for this model' s assembly and safe operation! Oe Always keep this instruction manual ready at hand for quick · This model will require a minimum 4 channel radio control (with 5 standard servos) for aircraft, if having fixed undercarriage, or 5 channel radio (with 6 standard servos), if fitting retractable undercarriage. [. . . ] L Read instruction manual supplied with radio control system thoroughly before use. ê , Å For retract gear, you will need 5channel radio, 1 retract servo, 1 extension cord. B Read through the manual before you begin, so you will have an overall idea of what to do. If you find any defective or missing parts, contact your local dealer or our Kyosho Distributor. ` Symbols used throughout this instruction manual comprise the following: @ not overlook this Do · Align the center line of main wing with aileron. Secure aileron hinges with instant glue, being careful not to glue the wing and aileron together. B , Æ Align lower face of engine mount arm on "Crankshaft Center line". B Always adjust the engine from behind, and never from in front or from the side. B Do not fly your aeroplane if it is a windy day or there are strong cross winds. Only fly model aeroplanes in areas away from houses and places where people gather. ¨ , Do not allow spectators to get too close to the model, especially a rotating propeller. B , If the model begins to operate by itself, there is another transmitter operating on your frequency. Do not try to operate your model if this happens, but change your transmitter and receiver crystals to another frequency. B By moving the various transmitter controls, ensure that all control surfaces move the way you intend them to. [. . . ] B By moving the various transmitter controls, ensure that all control surfaces move the way you intend them to. B To start the engine, set low throttle on the transmitter and hold the engine starter against the spinner. [. . . ]