User manual KYOSHO 30850 ULTIMA INSTRUCTIONS MANUAL

[. . . ] : This symbol indicates where caution is essential to avoid injury to yourself or others. : This symbol points out actions that you should NOT do to avoid possible damage or accidents. [. . . ] Be sure that you're operating on a unique frequency from any other RC vehicles in the area. Do not store this model in hot or humid conditions, or in direct sunlight. Do not run your car on ground: · Do NOT install any option parts not made by Kyosho for this model. 2ch with electric speed controller and 1 servo radio control set CAUTION: Only use a surface radio with 2 channels and electric speed controller!This kit requires a 2 channel radio con-trol set with electric speed controller. 8 Check that the servos move in accordance with the control from transmitter. Before assembling, please read the following carefully: First, read this instruction manual and familiarise yourself with the model's construction. Should any parts be missing, contact the retail shop from whom the model was purchased. Compare nuts, bolts, screws, etc to the "Actual Size" drawings on each page before fitting to ensure that you are installing the correct parts. Tighten Self tapping (TP) screws into parts until you have a secure attachment. However, be careful not to overly tighten TP screws as the threads may be damaged. This kit contains screws and hardware in different metric sizes and shapes. [. . . ] Tighten the screws with one sheet of paper inserted between both gears. Before painting, use a neutral detergent to remove any oil residues and dirt. [. . . ]