User manual KYOCERA TASKALFA 250CI

[. . . ] 250ci/300ci/400ci/500ci FAX System(Q) OPERATION GUIDE Please read this Operation Guide before using this machine. Keep it close to the machine for easy reference. Introduction In this Operation Guide, 250ci/300ci/400ci/500ci are referred to as 25 ppm model, 30 ppm model, 40 ppm model and 50 ppm model respectively. Safety Conventions in This Guide Please read the Operation Guide before using the facsimile. The sections of this handbook and parts of the facsimile marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the facsimile. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. [. . . ] When there are originals in the FAX Boxes, the number of pages is displayed. NOTE: The list can be printed when user login has been enabled and the machine is logged in with administrator privileges. 1 2 3 Press the System Menu key. Press [Document Box/Removable Memory], [Next] of FAX Box, and then [Print] of FAX Box List. The machine prints a list of the FAX Boxes. FAX Reception Box 4-36 OPERATION GUIDE FAX Operation (Advanced) Sub Address Communication Sub Address Communication Sub address communication is communication in which data is sent and received with sub addresses and passwords attached in conformance with the ITU-T (International Telecommunication Union) recommendations. Sub addresses enable communication modes with third-party machines that were previously only possible between our brand machines. These include confidential delivery (sending originals to an original delivery box set up in the receiving system) and polling communication (reception of documents from a source machine that is controlled from the receiving machine). Using sub address communication and the memory forwarding function on this machine also allows advanced communication functions such as storing received originals in FAX Boxes and forwarding originals to other fax machines. 4 NOTE: In order to conduct sub address communication, the other party's system also needs to be equipped with sub address communication functions of the same type. Sub address-based communication can be used together with various kind of functional communication. When registering a sub address and sub address password in the Address Book and One-touch keys, you can omit their entry before transmission. For details, refer to the explanations in the procedure of each communication method and registration method. Sub Address With the machine, sub address and sub address passwords are called sub address. Sub Address Use the numbers from 0 to 9, ` (space)', and `#' and `*' characters to enter a sub address of up to 20 digits. When the machine receives originals, the sub address is used as the forward requirement for memory forwarding. Sub Address Password Use the numbers from 0 to 9, ` (space)', and `#' and `*' characters to enter a sub address password of up to 20 digits. When the machine receives originals, a sub address password is not used. Sub Address Transmission To use sub address transmission, follow the steps below. NOTE: To use sub address transmission, check that a sub address and password have been set in the receiving system in advance. For the setting method when the machine receives originals, refer to Printing/Sending Received Faxes by Requirements (Memory Forwarding) on page 4-17. 1 2 3 Press the Send key. Entry]. OPERATION GUIDE 4-37 FAX Operation (Advanced) NOTE: When a sub address has been registered to the destination of the Address Book, you can use the destination. When a sub address-registered destination in the Address Book is used for a Onetouch key, you can also use the One-touch key. Entry Sub Address Destination 0 4 Use the numeric keys to enter the fax number of the other party. Pause Space Backspace Transmission Start Speed ECM Add a new FAX destination. Enter FAX number with the numeric keys. Encrypted Transmission On Hook Add to Addr Book Status Next Dest. Cancel OK 10/10/2008 10:10 5 FAX No. Press [Sub Address] and enter the sub address using the numeric keys. 6 1234567890 Sub Address Password Space Backspace NOTE: You can use up to 20 digits including the numbers from 0 to 9, ` (space)', `#' and `*' characters to enter a sub address. Set sub address. 20 digits) Cancel Status OK 10/10/2008 10:10 7 Press [Password] and enter the sub address password using the numeric keys. NOTE: You can use up to 20 digits including the numbers from 0 to 9, ` (space)', `#' and `*' characters to enter a sub address password. When the machine receives originals, a sub address password is not used. 8 9 Press [OK]. Transmission begins. 4-38 OPERATION GUIDE FAX Operation (Advanced) Program Dial You can register transmission requirements such as the other party to which you send originals and transmission time as a program. [. . . ] Specified sub address box is not registered in ourbrand recipient machine, or the sub address does not match. Recipient machine is not equipped with a sub address box function, or the sub address does not match. Encrypted transmission was canceled because the specified box is not registered. Encrypted transmission was canceled because the recipient fax is not equipped with an encrypted communication function. [. . . ]