User manual KYOCERA SCANNER-PLOTTER SYSTEM-E-

[. . . ] KM-C850/C850D KM-C2630/C2630D Network Scanner Operation Guide <Set-up Edition> ALWAYS read this Operation Guide thoroughly before use. After reading, maintain it in good condition and keep it together with the Operation Guide for your copier. Trademark Information · Microsoft, Windows, Windows NT and Internet Explorer are registered trademarks of Microsoft Corporation of America and other countries. · Windows Me and Windows XP are trademarks of Microsoft Corporation. · IBM and IBM PC/AT are trademarks of International Business Machines Corporation of America. [. . . ] Perform the following procedure in order to set the date and time in your area, as well as the time difference to GMT (Greenwich Mean Time). 4 Use the "s" and "t" cursor keys to select "Time difference" and then touch the "Change #" key. The Time Difference Setting screen will appear. 1 Press the Default Setting/Counter key. The Default Setting screen will appear. 5 Use the "+" and "­" keys to change the setting as desired. Touch the "Close" key to register the change to that setting. 2 Touch the "Machine default" key. The Machine Default screen will appear. Ex. : Time difference (Washington) GMT -5:00 (London) GMT 0:00 6 Use the "L " and "M " cursor keys to select "Date/ Time" and then touch the "Change #" key. The Date/ Time Setting screen will appear. 3 Use the numeric keys on the keypad to enter the administrator password number. The factory default setting for the KM-C850/C850D is "3100". * It is possible for you to change the administrator password number as desired. For more information, refer to the Operation Guide for your copier. 7 Use the "+" and "­" keys to change the setting as desired. Touch the "Close" key to register the change to that setting. * Be sure to set the time difference first and then the date and time. * If you change both of "Summertime" and "Date/ Time" setting, "Summertime" setting will be invalid. 2-6 2. Set-up 2-2 Setting up the scanner software (1) System requirements PC OS IBM PC/AT or compatible Windows 95 (OSR2), Windows 98 (Second Edition), Windows NT (Service Pack 5 or later), Windows 2000 (Service Pack 2 or later), Windows Me or Windows XP CPU RAM HDD Recommended environment CPU RAM HDD CD-ROM drive Ethernet cable Pentium 133 MHz or faster 64 MB or more 20 MB or more Celeron 266 MHz or faster 64 MB or more 300 MB or more 1 drive 10BASE-T or 100BASE-TX System environment (2) Installing the software There are four main functions available with this network scanner. Perform the following procedure in order to install into your computer the required utility that is appropriate to the application and operating system in use in your computer. · Scan to PC Stores the image data of scanned originals as a file in a desired folder on your computer. Install the Scanner File Utility into the corresponding computer in order to use this function. * Registration of the save folder in your computer, as well as registration in the scanner of the destination is required. For information on making settings from an Internet Web browser, as well as for each utility, refer to the On-Line Manual <Functions Edition> of this Operation Guide. · Send E-mail Sends the image data of scanned originals to the desired receiver as a file attached to an email message. * Registration in the scanner of the corresponding SMTP server settings is required. For information on making settings from an Internet Web browser, as well as for each utility, refer to the On-Line Manual <Functions Edition> of this Operation Guide. · TWAIN Connects to the scanner from the TWAIN-compatible application according to the procedures of that particular application. Install the TWAIN Source on the computer that contains the application in order to use this function. [. . . ] In any other case, check to make sure that the SMTP server is running, or consult with your network administrator. Consult with your network administrator to verify that the Login Account Name and password required for SMTP Authentication are correct. If the Address Book software is not running on your computer, start it up. If it is already running, make sure that your computer is connect properly to the network and the network cable is connected properly to the Scanner Interface Card. [. . . ]