User manual KYOCERA KM-C850

[. . . ] C850 C850D Please read the Operation Guide before using the copier Keep it close to the copier for easy reference <IMPORTANT> This Operation Guide is for the C850 and C850D copiers. The instructions contained herein are based on the C850 standard copier (for 1-sided copies only) and C850D duplex copier (for 2-sided copies). · Standard equipment C850: Two 500-sheet capacity drawers[cassettes] C850D: Duplex Unit and one 500-sheet capacity drawer[cassette] NOTE: This Operation Guide contains information that corresponds to using both the inch and metric versions of this copier. When the difference in a message is only one of upper- and lower-case spelling, we have listed the information as it specifically pertains to the inch version of this machine. [. . . ] The touch panel will return to the screen in step 2. Default setting - Management Metric specifications Management edit Close 1st Sales Dept. correction Delete Register 4 Use the numeric keys on the keypad to enter the maximum number of documents that can be transmitted under this ID-code. Limitation (1~999, 999) Limited value Back Close Department 01 02 0001 0014 00000015 00000016 00000017 Limit in use Down 001/010 Default setting - Management 2 No limit Counter limit Is not permitted 999, 999 clear Select "Copy limitation (All)" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. Inch specifications Limit in use Close Value Management - Management edit - New register Metric specifications Fax Transm. Limitation (1~999, 999) Limited value Back Close 0007 No limit Counter limit Is not permitted 999, 999 clear 1st Sales Dept. Limitation No limit No limit No limit No limit No limit No limit Change # Default setting - Management - Management edit Metric specifications Limit in use Close Value Management - Management edit - New register 5 Press the "Close" key. The touch panel will return to the screen in step 2. 0007 1st Sales Dept. Limitation No limit No limit No limit No limit No limit No limit Change # Default setting - Management - Management edit 7-14 Section 7 COPIER MANAGEMENT 3 To set the maximum number of copies that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited copies, press the "No limit" key, and to cancel copying privileges completely, press the "Is not permitted" key and proceed to step 5. Inch specifications Copy limitation (All) Back Close Copying restrictions (Full color) Perform the following procedure when you want to set the maximum number of full color copies that can be made under the corresponding department ID-code. NOTE This setting will not be available when "Is not permitted" is selected as the "Copying restrictions (All)" setting. No limit Counter limit Is not permitted Management - Management edit - New register 1 Access the screen that contains the copy restriction setting items. (See "Accessing the copy management menu screen" on page 7-3 or "Change restrictions for use" on page 7-23. ) Inch specifications Metric specifications Copy limitation (All) Back Close Management edit Department 01 02 0001 0014 00000015 00000016 00000017 1st Sales Dept. correction Delete Register Close Limit in use No limit Counter limit Is not permitted Management - Management edit - New register Down 001/010 Default setting - Management Metric specifications NOTE If you want to quit the displayed setting without changing it, press the "Back" key. The touch panel will return to the screen in step 2. Management edit Department 01 02 0001 0014 00000015 00000016 00000017 1st Sales Dept. correction Delete Register Close Limit in use 4 Down 001/010 Use the numeric keys on the keypad to enter the maximum number of copies that can be made under this ID-code. Inch specifications Copy limitation (All) (1~999, 999) Limited value Back Close Default setting - Management 2 999, 999 clear Select "Copy limit. (Full-Co. )" under the "Setting item" column on the left side of the touch panel and then press the "Change #" key. Limitation Value Close No limit Counter limit Is not permitted Management - Management edit - New register Metric specifications Copy limitation (All) (1~999, 999) Limited value Back Close No limit No limit No limit No limit No limit No limit Change # Default setting - Management - Management edit No limit Counter limit Is not permitted 999, 999 clear Metric specifications Limit in use 0007 1st Sales Dept. Limitation Value Close Management - Management edit - New register 5 Press the "Close" key. The touch panel will return to the screen in step 2. No limit No limit No limit No limit No limit No limit Change # Default setting - Management - Management edit 7-15 Section 7 COPIER MANAGEMENT 3 To set the maximum number of full color copies that can be made under this ID-code, press the "Counter limit" key and proceed to the next step. To allow unlimited full color copies, press the "No limit" key, and to cancel full color copying privileges completely, press the "Is not permitted" key. (Full-Co. ) Back Close Printing restrictions (All) Perform the following procedure when the optional Printer Kit is installed in your copier and you want to set the maximum number of printouts that can be made under the corresponding department ID-code. NOTES · This setting limits the maximum number of full-color and black and white printouts that can be made in total. · This setting will only be available when "On" is selected as the "Printer function management ON/OFF" setting. No limit Counter limit Is not permitted Management - Management edit - New register Metric specifications Copy limit. [. . . ] 6-57 Selecting functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Selecting the color mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Selecting the image quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Selecting the location of copy ejection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]