User manual KYOCERA KM-C2230

[. . . ] KM-C2230 User's Guide Please read the User's Guide before using the copier. Keep it close to the copier for easy reference. Introduction Thank you for choosing this machine. This manual contains details on the operation of the various functions of the machine, precautions on its use, and basic troubleshooting procedures. In order to ensure that this machine is used correctly and efficiently, carefully read this manual before using the machine. After reading the manual, store it in the designated holder so that it can easily be referred to when questions or problems arise during operation. [. . . ] Therefore, be careful when selecting this setting while making enlarged or reduced copies. Example) When erasing a frame around an 11 × 17-size document and copying with a zoom ratio of ×0. 500 Original (11 × 17 L) Copy (5-1/2 × 8-1/2 L) X 0. 5 Application Functions 3/4 in. (10 mm) Example) When erasing a frame around a 5-1/2 × 8-1/2-size document and copying with a zoom ratio of ×2. 000 Original (5-1/2 × 8-1/2 L) X 2. 0 Copy (11 × 17 L) 1/2 in. (20 mm) 7-12 7. 5 Erasing Sections of Copies ("Edge/Frame Erase" Function) 7 Chapter 7 Application Functions 7-13 6 Normally, the document size is automatically detected. However, if you wish to specify the document size, touch [Original Size Input]. Select the document size, and then touch [Enter]. 7 If the desired document size is not listed, touch [Other Sizes] to display a screen containing additional document sizes. Select the appropriate document size, and then touch [Enter]. 8 To specify a photo size or a non-standard size, touch [Photo Size or Custom Size]. Select a photo size, or touch [X] and [Y], and touch and to select the size of the original, and then touch [Enter]. 7 Chapter 7 7. 5 Erasing Sections of Copies ("Edge/Frame Erase" Function) 9 In the Edge/Frame Erase screen, touch [Enter]. To cancel the "Edge/Frame Erase" function, touch [Cancel] in the Edge/ Frame Erase screen. Application Functions 10 If necessary, specify any other copy settings. 11 Press the [Start] key. 7-14 7. 6 Adjusting the Document Image ("Image Adjustment" Function) 7 Chapter 7 Application Functions 7. 6 Adjusting the Document Image ("Image Adjustment" Function) If the document size is different from the paper size, the document image can be enlarged to fill the copy paper. The image can be adjusted in either of the following two ways. G "Full Size" Setting The entire document is enlarged to its maximum so that it fits fully within the paper (without changing the proportions of the image). G "Center Zoom" Setting The document is enlarged until its shorter sides fit fully within the paper (without changing the proportions of the image). Hint When using the "Image Adjustment" function, place the document on the original glass. 7-15 7 Chapter 7 7. 6 Adjusting the Document Image ("Image Adjustment" Function) To use the "Image Adjustment" function 1 Place the document on the original glass. Application Functions Reference For details, refer to "Feeding the Document" on page 2-41. 2 Touch [Application]. The Application screen appears. 3 Touch [Image Adjustment]. 4 Select either "Full Size" or "Center Zoom". 7-16 7. 6 Adjusting the Document Image ("Image Adjustment" Function) 7 Chapter 7 Application Functions 7-17 5 Normally, the document size is automatically detected. However, if you wish to specify the document size, touch [Original Size Input]. Select the document size, and then touch [Enter]. 6 If the desired document size is not listed, touch [Other Sizes] to display a screen containing additional document sizes. Select the appropriate document size, and then touch [Enter]. 7 To specify a photo size or a non-standard size, touch [Photo Size or Custom Size]. Select a photo size, or touch [X] and [Y], and touch and to select the size of the original, and then touch [Enter]. 7 Chapter 7 7. 6 Adjusting the Document Image ("Image Adjustment" Function) 8 In the Image Adjustment screen, touch [Enter]. To cancel the "Image Adjustment" function, touch [Cancel] in the Image Adjustment screen. Application Functions 9 If necessary, specify any other copy settings. 10 Press the [Start] key. 7-18 7. 7 Tiling Copy Images ("Image Repeat" Function) 7 Chapter 7 7-19 7. 7 Tiling Copy Images ("Image Repeat" Function) Multiple copies of an original can be printed in a single sheet of paper. The number of copies printed in a page (the number of times the image is repeated) is set according to the document size, zoom ratio, paper size and print area settings. To use the "Image Repeat" function 1 Position the document(s) to be copied. Reference For details, refer to "Feeding the Document" on page 2-41. 2 Specify the desired Paper/Size and Zoom settings. Specify the zoom ratio and paper size manually. Reference For details, refer to "Selecting a Paper/Size Setting" on page 3-18 and "Specifying a Zoom Setting" on page 3-13. 3 Touch [Application]. The Application screen appears. 4 Touch [Image Repeat]. Application Functions 7 Chapter 7 7. 7 Tiling Copy Images ("Image Repeat" Function) 5 Select either [With Margin] or [Without Margin]. To reduce the image so that it fits within the allowable print area for the paper (inside the area that excludes the margins), touch [With Margin]. To make copies so that the paper is filled regardless of the margins, touch [Without Margin]. In this case, the area of the image within the margins at the edge of the paper is lost. Application Functions 6 Normally, the document size is automatically detected. However, if you wish to specify the document size, touch [Original Size Input]. Select the document size, and then touch [Enter]. 7 If the desired document size is not listed, touch [Other Sizes] to display a screen containing additional document sizes. Select the appropriate document size, and then touch [Enter]. 7-20 7. 7 Tiling Copy Images ("Image Repeat" Function) 7 Chapter 7 Application Functions 7-21 8 To specify a photo size or a non-standard size, touch [Photo Size or Custom Size]. Select a photo size, or touch [X] and [Y], and touch and to select the size of the original, and then touch [Enter]. 9 In the Image Repeat screen, touch [Enter]. To cancel the "Image Repeat" function, touch [Cancel] in the Image Repeat screen. 10 If necessary, specify any other copy settings. 11 Press the [Start] key. 7 Chapter 7 7. 8 Inserting Paper Between Transparencies ("OHP Interleave" Function) 7. 8 Inserting Paper Between Transparencies ("OHP Interleave" Function) Application Functions After each overhead transparency is copied, a page from a different paper source can be added to the stack of transparencies as an overleaf. In order to use this function, the overhead transparencies should be loaded into the 1st drawer. To use the "OHP Interleave" function 1 Load interleaf paper with the same size and orientation as the overhead transparencies into any paper drawer other than the 1st drawer. 2 Position the document(s) to be copied. Reference For details, refer to "Feeding the Document" on page 2-41. 3 Touch [Application]. The Application screen appears. 4 Touch [OHP Interleave]. 7-22 7. 8 Inserting Paper Between Transparencies ("OHP Interleave" Function) 7 Chapter 7 7-23 5 Select the paper drawer loaded with the paper for the interleaves, and then touch [Enter]. To cancel the "OHP Interleave" function, touch [Cancel] in the OHP Interleave screen. 6 If necessary, specify any other copy settings. 7 Press the [Start] key. Application Functions 7 Chapter 7 7. 9 Making Bound Booklets ("Booklet Original" Function) 7. 9 Making Bound Booklets ("Booklet Original" Function) Booklets with their staples removed can be copied and bound to create booklet copies. Application Functions Condition The "Booklet Original" function is only available if the optional finisher DF-626 is installed. To use the "Booklet Original" function 1 Remove the staples from the booklet document to be copied, and then position it. Additional Information The document can be positioned in either of the following ways. When placed on the original glass Position each page spread out in the following order: the side with the first page, the side with the second page, the side with the third page, etc. 7-24 7. 9 Making Bound Booklets ("Booklet Original" Function) When using the reverse automatic document feeder Spread out the booklet from the middle, and then load it into the reverse automatic document feeder with the front cover at the top. 7 Chapter 7 Application Functions Reminder!If the document consists of too many pages, the booklet cannot be bound. 2 Touch [Application]. The Application screen appears. 3 Touch [Booklet Original]. 7-25 7 Chapter 7 7. 9 Making Bound Booklets ("Booklet Original" Function) 4 According to how the document will be fed, select "Original Glass" or "Document Feeder". Application Functions 5 Touch [Enter]. To cancel the "Booklet Original" function, touch [Cancel] in the Booklet Original screen. 6 If necessary, specify any other copy settings. 7 Press the [Start] key. 7-26 7. 10 Improving Color Copy Quality (Color Image Adjustment Parameters) 7 Chapter 7 Application Functions 7. 10 Improving Color Copy Quality (Color Image Adjustment Parameters) By making various color adjustments, you can adjust the quality of color copies as desired. Reference Samples for the Color Image Adjustment parameters can be seen in the Creative Image Book. [. . . ] 13-2 Specify conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-35 Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-78 Staple cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-11, 11-12, 11-15 Staples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-50, 11-53 Stapling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]