User manual KYOCERA KM-4800W

[. . . ] KM-4800w Copy/Scan Operation Manual NOTE: This Operation Manual contains information that corresponds to using both the metric and inch versions of these machines. The metric versions of these machines are shown in the screens in this Manual. If you are using the inch version, use the messages provided for the metric version as reference only. In the body text, only the metric messages are given if these versions differ only in capitalization. [. . . ] To shift an image on a print, press the R3 Key or L3 Key in Advanced Settings Screen to enter Advanced Settings 2 Screen. Shift adjustment covers 0 to 200 millimeters in increments of 1 millimeter. Press the L3 Key repeatedly to choose "Left" or "Right", press R3 Key repeatedly to choose "Upper" or "Bottom". Enter a margin amount with the Numeric Keys. Press the Enter Key to apply the setting. 3. 3. 7. 8 Mirror To make a mirror print, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. Press the L1 Key repeatedly to choose "ON" or "OFF". Press Enter to apply the setting. 28 3. 3. 7. 9 Background To delete a background of the original, Press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. A background of the original is not printed when Background is "OFF". Press the L2 Key repeatedly to choose "ON" or "OFF". 3. 3. 7. 10 Set Copy To make a set copy, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. Press the L3 Key repeatedly to choose "ON" or "OFF". 3. 3. 7. 11 Sort Mode To choose a sort Mode, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. (a) Sort Mode: 1, 2, 3 (b) Sort Mode: 1, 2, 3 123, 123, 123 111, 222, 333 Press the Enter Key to apply the setting. 3. 3. 7. 12 Date Stamp To print the date stamp on a copy, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. Press the R1 Key to enter Date Stamp Settings. 29 Press the L1 Key repeatedly to choose "ON" or "OFF". Stamp image is printed at the left upper on the image when "Left" is selected. Stamp image is printed at the right upper on the image when "Right" is selected. Each the setting ranges for both X and Y is 0 to 100 millimeters in increments of 1 millimeter. Ex. ) Mon Jul 14 21:22:05 2008 Press the Enter Key to apply the setting. 3. 3. 7. 13 Negative Image To make a negative image print, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. Press the R2 Key repeatedly to choose "ON" or "OFF". 30 3. 3. 7. 14 Original Width Setting To specify the original width to be scanned, press the R4 Key or L4 Key in Advanced Settings Screen to enter Advanced Settings 3 Screen. Press the R3 Key to enter Original Width Setting. "Auto" can be used in most cases. Press the L1 Key and R1 Key to select the original width from preset width Press the L2, R2 Key to enter a given width manually in "Width Entry" with the Numeric Keys. The selection of "Original Width" differs depending on the current Size Format. [. . . ] · Date · Print Counter · Scanner Version · Printer Version · Controller Version · Print Information 5. 2. 6 User Mode To configure the following settings, press the R3 Key in Menu Mode Screen to enter User Mode Screen. · User Default Settings · Change User Password · Initialize Scan to File Password · Printer Settings · Language 61 5. 2. 6. 1 User Default Settings User Default Settings enables to customize the default states for several items, which will be applied in the boot sequence or by pressing the Reset Key. Press the L1 Key in User Mode Screen to enter User Default Settings Screen. Press the L1 Key repeatedly to choose either of the items for Size select in Copy Mode. Press the L2 Key repeatedly to choose either of the items for Cut Mode in Copy Mode. [. . . ]